Steps
- 1Wash your car. Use soap and water in a bucket and a soft rag, terry cloth will probably do it, but they sell some fancy ones at car parts stores. Clean your rag often by dipping it in the bucket and swishing it around, this removes dirt that you have collected and prevents your paint from being scratched.
Car Care Products
Car Wax & Polish Manufacturing Repack Brand Your Own Product line
www.instafinish.com - 2Polish your car. This will get the old wax (and any oxidation if it has been a while since your last wax job) You will need to buy a commercial car polish, one again available at your car parts store. There will be instructions on the back of the bottle. It is generally best to work small areas at a time. If you want to save some energy you can get an electric buffer/polisher, but this can cause ‘paint burn’ so your best bet is a dual-action polisher. Be sure you polish evenly because if you don’t even the best wax job won’t hide your blunders.
- 3Wax your car. This is what seals the paint and protects it from the elements. Now be very careful with this step because that’s why you are doing this in the first place. Once again you will need to buy a wax at the car parts store; try to get the same brand as the polish. Carefully read the instructions on the back. Apply the wax with a very soft rag if you don't like terry cloth. Use clean rags, you will probably go through a bunch so have a lot on hand. It is generally best to work in sections, and do this by hand the buffer is probably not necessary for this part. You may want to apply more than one coat.
- 4Follow up. Keep the car clean, what is the point of a waxed car if it is covered with dirt? Also, you may want to apply so in-between-wax-jobs car protectors every once in a while. These will be in the same section as all the other stuff you bought.
easy-to-clean coatings
non-stick, hydrophobic + nanoeffect -environment-friendly + food safe
www.nanocare-ag.com/produkte/
Tips
- This will take time, don't do it unless you have at least 4 hours to devote to it.
- Don't do this under direct sun, maybe wait for a slightly overcast day.
- Consider having a professional do it.
Concrete Floor Grinding
Concrete Floor Grinding and Polish Machines with all Gear Drive...www.Levetec.com
Construction Equipment
Find Hitachi Excavators, Loaders, Dump Trucks and more Equipmentwww.hitachi-c-m.com/mideast
Stop Aluminum Rust Now
Easy to use one coat NO-OX-ID will immediately stop aluminum rustwww.sanchem.com
Hiç yorum yok:
Yorum Gönder