Effortless Options for Maintaining Your Car’s Cooling System

The automobile cooling system plays a critical part in the functioning of your car’s engine just like other important components such as water pump, head gasket or radiator and thus its maintenance cannot be neglected. Car’s cooling system needs to be checked and taken care of on regular basis and as per manufacturer’s guidelines. The maintenance is required not only to keep all the components working properly without any flaws but also to enhance the life-span of the complete engine and its parts like   pistons, cylinders and valves.
Firstly, read the owner’s manual and flush out the radiator according to mentioned details. This is quite a simple process and all you require is to drain the coolant also known as antifreeze from the bottom of the radiator by thoroughly flushing everything out with cold water, you can use a garden hose for the same. Now refill the radiator with new coolant or anti-freeze. Basically the dust and debris accumulated in the radiator causes overheating and thus prevent the engine from functioning and radiator flush forbids the collecting of engine deposits and junk inside the radiator.
Secondly, inspect all the radiator hoses crafted inside to properly maintain the cooling system of your car. Overtime, the hoses gets brittle, chapped or develop small holes, which leads to leakage and this is the reason why they need to be replaced timely. It’s a good option to carry spare set of radiator hoses in your vehicle as changing the hoses of cooling system is not such a difficult task and can be easily done.
Thirdly, periodically check the water pump for any water stains on the pump housing and do check the looseness in the shaft pulley as well because with time they tend to wear-out and require right maintenance. Water pumps of the cooling system also fail to function because of cracks in the seals or due to faulty bearing and just by carefully scrutinizing these two features as per schedule you can eliminate the chance of pump failure.
Fourthly, pay thorough attention to the complete engine area, crankcase and radiator for any type of frothy junk or fluid. This residue is accumulated due to mixture of oil and engine coolant and can lead to worn out head gasket. Even the pistons, valves and cylinders can melt due to the rising heat developed by worn or cracked up head gasket as it is the seal between the crankcase and the engine block and prevent the engine to heat-up.
Also make sure to examine the entire cooling system of your car for any type of leaks or damages. It’s easy to spot the different bright colored fluids like anti-freeze and coolant, especially if they are dripping out of the holdings, because cleaning the same is very essential.

 source:http://www.carzy.co.in/blog/car-maintenance-tips/