Replacing your car’s engine oil is extremely important after few thousand miles as the oil in your car engine will begin to foul and damage the engine components. The automotive manufacturers advise to change the oil every 3,000 miles or three months. Many of us prefer to take our car to professional for engine oil change but the same can easily be done at home. Check the engine oil level and carry out these simplistic steps to replace your car’s engine oil. Make sure with the oil change you change your filter as well.
Instructions to follow:
1.Firstly, park your vehicle at a safe place and engage the parking break. Now place a pair of car jacks in the location best suited for your car. You need to hoist the front end of the car up in order to reach the oil pan.
2.Check out the oil filter and remove it, you can take the help of user manual to locate the oil filter. The oil filter is located next to the oil pan. You can use the locking wrench to turn the filter counter clockwise and remove it. Now empty the oil filter into an oil drain container.
3.After removing the oil filter, clean the mounting flange and also remove the sealing rubber gasket from the old filter. Rub a little bit of motor oil onto the rubber gasket of the new filter and place it again by hand.
4.Locate and remove the oil pan drain plug. What you need to do is to simply turn the plug counterclockwise using a socket wrench or the boxed end of a regular wrench. Keep a container ready to fill it with oil.
5.Drain the oil from the engine and meantime clean the drain plug and check its integrity. Check it thoroughly, if it’s broken or have a worn-out seal, better replace it immediately. After the oil is completely drained, reinsert the plug, screw it up and clean off the area around.
6.Just lower the car jacks now and add new engine oil to the car.
7.Remove the engine’s cap on the valve cover and fill four quarts of oil into your engine and screw up the cap back. Turn the car engine on and let it run for a minute.
8.Lastly, check the oil level by removing the dipstick and ensure that the oil level is between the indicated lines on the dipstick.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
13 Kasım 2011 Pazar
Simple Tricks to Remove Car Fuses
As getting advance in every field, the motor vehicle safety is also not far behind and the fuse does play a crucial part in the car model since a very long time. Fuses actually protect your car from electrical short circuits and power loads that damage the equipment or begin to catch fire. All the electrical accessories present in the vehicle are protected by the fuse design. The fuses basically blow because of a momentary overload but a bad fuse can be easily replaced by following simple directed tricks. What all things you’ll require to remove the car fuses are mentioned below:
Required Things:
1.Owner’s manual
2.Safety glasses
3.Flashlight
4.Small pliers
5.Fuse puller
6.Fuses
Simple tricks to follow:
1.Check out the owner’s manual and it will easily tell you how to locate the fuse box. It’s usually a small plastic box of square or rectangular shape. You can easily open the box without the help of any tool as it is covered with a tab that pops open. Many of the car models have a second fuse box located inside the engine compartment. The fuses will be small in size and of plastic with two-pronged tabs plugged into a slot. And depending on the amperage, they will be of red, green, blue or yellow color. You can easily see the marked amps on the panel and corresponding fuses, they’ll range from 5 to 35 amps in increments of 5. The old car models have small, glass, tubular fuses, which are 1/2 to 1 inch long with stainless steel caps on each end.
2.Now locate the fuse panel, in many vehicles it is set under the dashboard on the driver’s side but you’ll require a flashlight for the same. While you can even check out on other location like lower half or side of the driver’s dash panel, inside the glove box, and under the hood near one of the fenders or firewall. The word ‘Fuses’ is always mentioned on the cover of the fuse panel. The panel size is same as an ipod or somewhere around it when it is under the dashboard else slightly larger when located under the hood.
3.Just pull out the panel cover and check out the fuse location and details with the help of owner’s manual. You can locate the amps and associated parts stamped on the panel next to each fuse with labels or numbers.
4.You need to discover and identify which fuse is creating electrical problem.
5.Once you’ve discovered the blown fuse, just remove it. Many of the car models come with plastic fuses and usually have a special tool in the fuse panel. The fuse puller is somewhat like a small plastic tweezers, which has special teeth to pull the fuses. The older glass fuse models are not equipped with a puller and you can easily buy one from any of the automotive supply store. Both the fuses can be pulled with the help of small regular needle-nose shaped pliers. Remember to protect your eyes with safety glasses.
6.Carefully examine the fuses, the plastic ones are transparent in look and you’ll see the U-shaped metal link inside that connects the two prongs. If the fuse is blown, you’ll immediately recognize it by a broken link. While in glass fuses the thin filament of glass breaks apart when blown.
7.Gently replace the blown fuse with the same length and rating or color and rating. Few of the new models come with spares; else you can purchase them from a local automotive store. Just take the hold of plastic fuse with your hand, holder or pliers and push the same into the slot. Make sure while handling the glass fuse you snap it in, one at a time.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Required Things:
1.Owner’s manual
2.Safety glasses
3.Flashlight
4.Small pliers
5.Fuse puller
6.Fuses
Simple tricks to follow:
1.Check out the owner’s manual and it will easily tell you how to locate the fuse box. It’s usually a small plastic box of square or rectangular shape. You can easily open the box without the help of any tool as it is covered with a tab that pops open. Many of the car models have a second fuse box located inside the engine compartment. The fuses will be small in size and of plastic with two-pronged tabs plugged into a slot. And depending on the amperage, they will be of red, green, blue or yellow color. You can easily see the marked amps on the panel and corresponding fuses, they’ll range from 5 to 35 amps in increments of 5. The old car models have small, glass, tubular fuses, which are 1/2 to 1 inch long with stainless steel caps on each end.
2.Now locate the fuse panel, in many vehicles it is set under the dashboard on the driver’s side but you’ll require a flashlight for the same. While you can even check out on other location like lower half or side of the driver’s dash panel, inside the glove box, and under the hood near one of the fenders or firewall. The word ‘Fuses’ is always mentioned on the cover of the fuse panel. The panel size is same as an ipod or somewhere around it when it is under the dashboard else slightly larger when located under the hood.
3.Just pull out the panel cover and check out the fuse location and details with the help of owner’s manual. You can locate the amps and associated parts stamped on the panel next to each fuse with labels or numbers.
4.You need to discover and identify which fuse is creating electrical problem.
5.Once you’ve discovered the blown fuse, just remove it. Many of the car models come with plastic fuses and usually have a special tool in the fuse panel. The fuse puller is somewhat like a small plastic tweezers, which has special teeth to pull the fuses. The older glass fuse models are not equipped with a puller and you can easily buy one from any of the automotive supply store. Both the fuses can be pulled with the help of small regular needle-nose shaped pliers. Remember to protect your eyes with safety glasses.
6.Carefully examine the fuses, the plastic ones are transparent in look and you’ll see the U-shaped metal link inside that connects the two prongs. If the fuse is blown, you’ll immediately recognize it by a broken link. While in glass fuses the thin filament of glass breaks apart when blown.
7.Gently replace the blown fuse with the same length and rating or color and rating. Few of the new models come with spares; else you can purchase them from a local automotive store. Just take the hold of plastic fuse with your hand, holder or pliers and push the same into the slot. Make sure while handling the glass fuse you snap it in, one at a time.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Few Great Options to Inflate Tires
Tires play a major role in handling, braking and about the overall safety of a car. And that’s the reason why it’s essential to regularly check your tires, especially when it comes to safeguard your family. This includes frequently checking your tires visually as well as keeping a professional inspection too. It is also important to replace and repair the tires whenever required. Routine maintenance needs proper and equally inflated tires and below mentioned are few great options in order to easily inflate tires on your own.
You’ll Require: Tire-pressure gauge
Instruction to follow:
1.Better don’t rely on your eyes and visually check the tires every time you want to check the pressure of your tires.
2.Make sure you own a good piece of tire-pressure gauge to check the air pressure of your car tires at least once in a month. A tire-pressure gauge is easily available at any of the local auto parts store for a price tag of Rs 400-500 and the same varies accordingly.
3.Ensure that the tires are inflated according to manufacturer’s recommended pressure. You can read the related information mentioned on the door of the glove compartment, the door jamb or the inside of the door to the gas cap.
4.Always measure the pressure when the tires are cool because the tire pressure rises up when the tires are warm. Therefore the tire-pressure gauge will give inaccurate reading.
5.You can easily inflate the tires by unscrewing the plastic cap that covers the air valve.
6.Now gently inflate the tires with air and do press the air hose onto the valve and squeeze the lever on the hose.
7.Don’t forget to check the air pressure of all the tires in order to discover that they are inflated correctly.
8.Incase if you’ve inflated extra air into the tires, let some air get released from the tires by pressing the needle in the center of the air valve. Makes sure you do the same with each and every tire and thereafter replace the cap over the air valve.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
You’ll Require: Tire-pressure gauge
Instruction to follow:
1.Better don’t rely on your eyes and visually check the tires every time you want to check the pressure of your tires.
2.Make sure you own a good piece of tire-pressure gauge to check the air pressure of your car tires at least once in a month. A tire-pressure gauge is easily available at any of the local auto parts store for a price tag of Rs 400-500 and the same varies accordingly.
3.Ensure that the tires are inflated according to manufacturer’s recommended pressure. You can read the related information mentioned on the door of the glove compartment, the door jamb or the inside of the door to the gas cap.
4.Always measure the pressure when the tires are cool because the tire pressure rises up when the tires are warm. Therefore the tire-pressure gauge will give inaccurate reading.
5.You can easily inflate the tires by unscrewing the plastic cap that covers the air valve.
6.Now gently inflate the tires with air and do press the air hose onto the valve and squeeze the lever on the hose.
7.Don’t forget to check the air pressure of all the tires in order to discover that they are inflated correctly.
8.Incase if you’ve inflated extra air into the tires, let some air get released from the tires by pressing the needle in the center of the air valve. Makes sure you do the same with each and every tire and thereafter replace the cap over the air valve.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Right Way to Add Engine Coolant to Your Car
The engine’s cooling system in your car prevents it from overheating and reaching the boiling point. The coolant, also known as antifreeze, radiator fluid or water actually keeps the engine temperature stable under all extreme weather conditions. The coolant absorbs the excessive heat from the engine and dispels it out in the air through the radiator. It does protect your engine from freezing in extreme chilling weather period. And it’s quite essential to check your coolant level at regular intervals in order to maintain the required fluid level.
Things you’ll require:
2.You must also know that the coolant needs to be properly diluted; this means exactly a mixture of 50% coolant and 50% water. You can do this yourself and if not sure a premixed coolant, which is ready to use is easily available in the market or automotive retail store.
3.Find out the hood release located under the dashboard in your car and gently pull to release the hood.
4.After you’ve opened the hood, locate the coolant reservoir. Take the help of manual if needed, basically the reservoir is usually white plastic and you can even see the fluid inside it.
5.Now gradually pour the coolant into the reservoir until the fluid level reaches the “full” mark. Its better you use a funnel to prevent spilling.
6.After the coolant is added in your engine, simply replace the cap on reservoir and close the hood.
7.You can also add coolant directly into the radiator if coolant reservoir is not present. Find out the radiator cap and pour in fluid until the reservoir is filled.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Things you’ll require:
- Coolant
- Funnel
2.You must also know that the coolant needs to be properly diluted; this means exactly a mixture of 50% coolant and 50% water. You can do this yourself and if not sure a premixed coolant, which is ready to use is easily available in the market or automotive retail store.
3.Find out the hood release located under the dashboard in your car and gently pull to release the hood.
4.After you’ve opened the hood, locate the coolant reservoir. Take the help of manual if needed, basically the reservoir is usually white plastic and you can even see the fluid inside it.
5.Now gradually pour the coolant into the reservoir until the fluid level reaches the “full” mark. Its better you use a funnel to prevent spilling.
6.After the coolant is added in your engine, simply replace the cap on reservoir and close the hood.
7.You can also add coolant directly into the radiator if coolant reservoir is not present. Find out the radiator cap and pour in fluid until the reservoir is filled.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Quick Simple Ways to Improve Diesel Fuel Quality
For the sake of environment, many of the automotive users prefer to drive diesel engine cars. The diesel fuel is not only cost effective but also much cleaner than the traditional fossil fuels. Though it’s not completely pollution free but being readily available is always preferable. Most of us are unaware that even vegetable oil can be converted into diesel whereas low quality diesel oil can decrease fuel efficiency and increase pollution.
What you’ll require:
1.Additives
2.Conversion kit
1.Firstly you need to make use of additives in order to improve the quality of your diesel fuel. In the market you’ll find variety of additives that can actually enhance the fuel efficiency plus also preventing the formation of wax crystals in cold weather conditions. You can easily select the best additive from the local auto store or nearby mechanic shop.
2.Make sure you purchase professionally manufactured diesel because the one made at home lacks that effective diesel quality and its best that some technical proficiency is left for the professionals.
3.A good tip is that you must add little kerosene to your diesel fuel. Adding kerosene can help improve car’s mileage you acquire from the fuel. In turn this will also produce lesser emissions than the pure diesel of low quality.
4.It’s advisable to get a conversion kit for the use of biodiesels. Biodiesels are basically diesel fuels made from all natural ingredients such as vegetable oil and using one will fairly improve the quality and performance of the fuel.
5.You must always prefer to buy your diesel fuel from a reputed dealer so that you are ensured to get the quality diesel fuel for your car.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
What you’ll require:
1.Additives
2.Conversion kit
1.Firstly you need to make use of additives in order to improve the quality of your diesel fuel. In the market you’ll find variety of additives that can actually enhance the fuel efficiency plus also preventing the formation of wax crystals in cold weather conditions. You can easily select the best additive from the local auto store or nearby mechanic shop.
2.Make sure you purchase professionally manufactured diesel because the one made at home lacks that effective diesel quality and its best that some technical proficiency is left for the professionals.
3.A good tip is that you must add little kerosene to your diesel fuel. Adding kerosene can help improve car’s mileage you acquire from the fuel. In turn this will also produce lesser emissions than the pure diesel of low quality.
4.It’s advisable to get a conversion kit for the use of biodiesels. Biodiesels are basically diesel fuels made from all natural ingredients such as vegetable oil and using one will fairly improve the quality and performance of the fuel.
5.You must always prefer to buy your diesel fuel from a reputed dealer so that you are ensured to get the quality diesel fuel for your car.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Amazing Tricks for Tuning Up Your Car
Tuning up your car can be an easy task if you are technically efficient and know the whereabouts of an engine embedded in the car. A tune-Up is very essential for your vehicle also called as major servicing atleast once every two years. Tune-Up service always makes your car more efficient rendering optimum performance plus enhancing the life of the vehicle and its overall functioning.
Important things required:
1.Fuel Filters
2.Car Parts
3.Spark Plugs
4.Car Manuals
5.Oil Filters
6.Phillips-head Screwdriver Sets
7.Distributor Caps
8.Air Filters
9.Spark Plug Gapping Tools
1.Fuel Filter needs to be replaced when it comes to tuning up your car. Remember that if you have a fuel-injection system, the cleaning is only required when the injectors are clogged, else it is not so essential.
2.Spark Plugs needs to be changed and at the same time do check the spark plug wires as well, change if required. It’s absolutely worthy to purchase a set of high-quality wires if needed.
3.Do replace the distributor cap and rotor but in case if you own a newer car model, the same does not exist.
4.If you own an old car, make sure to change the points and condenser. It’s recommended that you actually change the points or adjust them every six months, also check the ignition timing as well.
5.Also examine the ignition timing and adjust accordingly or when needed.
6.Do adjust the valves as well and according to requirement. Also replace the valve cover gasket as well particularly when there is oil on top of your engine.
7.Replace the worn-out belts.
8.Check all the fluid levels under the hood and refill timely. Do change the oil and oil filter after every 5000 kms.
9.Air Filter needs to be replaced after every 25000 kms.
10.In case of manual transmission, do adjust the clutch although many of the new crafted cars are embedded with self-adjusting clutches.
11.Servicing of the battery is equally important and do add the distilled water timely into it. Also make sure to clean the battery terminals and cable ends.
12.Lastly, do change the PCV or positive crankcase ventilation valve to make your car run smoothly as the clogged valve makes the ride rough plus the replacement is quite easy and cheap too.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things required:
1.Fuel Filters
2.Car Parts
3.Spark Plugs
4.Car Manuals
5.Oil Filters
6.Phillips-head Screwdriver Sets
7.Distributor Caps
8.Air Filters
9.Spark Plug Gapping Tools
1.Fuel Filter needs to be replaced when it comes to tuning up your car. Remember that if you have a fuel-injection system, the cleaning is only required when the injectors are clogged, else it is not so essential.
2.Spark Plugs needs to be changed and at the same time do check the spark plug wires as well, change if required. It’s absolutely worthy to purchase a set of high-quality wires if needed.
3.Do replace the distributor cap and rotor but in case if you own a newer car model, the same does not exist.
4.If you own an old car, make sure to change the points and condenser. It’s recommended that you actually change the points or adjust them every six months, also check the ignition timing as well.
5.Also examine the ignition timing and adjust accordingly or when needed.
6.Do adjust the valves as well and according to requirement. Also replace the valve cover gasket as well particularly when there is oil on top of your engine.
7.Replace the worn-out belts.
8.Check all the fluid levels under the hood and refill timely. Do change the oil and oil filter after every 5000 kms.
9.Air Filter needs to be replaced after every 25000 kms.
10.In case of manual transmission, do adjust the clutch although many of the new crafted cars are embedded with self-adjusting clutches.
11.Servicing of the battery is equally important and do add the distilled water timely into it. Also make sure to clean the battery terminals and cable ends.
12.Lastly, do change the PCV or positive crankcase ventilation valve to make your car run smoothly as the clogged valve makes the ride rough plus the replacement is quite easy and cheap too.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
9 Kasım 2011 Çarşamba
car tips VİDEO
Winter Driving and Car Maintenance Tips
http://www.youtube.com/watch?v=xLqXONxkTHYCar Maintenance Tips : How Can I Fix My Gas Gauge?
http://www.youtube.com/watch?v=e2_lsvxqPS0Car Maintenance and Repair Tips : How Do Fuses Work in a Vehicle
http://www.youtube.com/watch?v=-sz-DegirT8Car Maintenance and Repair Tips : How to Check Your Transmission Fluid in a Vehicle
http://www.youtube.com/watch?v=REZcXMpnADc&feature=relmfuCar Maintenance Tips : How to Clean an Air Intake Filter
http://www.youtube.com/watch?v=CBX8_4EH8wsCar Maintenance and Repair Tips : How to Navigate Under the Hood
http://www.youtube.com/watch?v=95EW0crtYAI
Kaydol:
Kayıtlar (Atom)