When the car door comes in contact with water, salt and road grim collect, the rust starts surfacing on its exposed metal due to the reaction of oxidation. Rust present on your car’s body not only proves a road-presence spoiler for your car but also poses a danger of growing from a small spot to whole car body. The rust generally starts developing on metal exposed through scratches on car’s body. The immediate removal of rust ensures that it will not spread to other parts of the car. Here are few easy tips for removing rust from a car door.
1)First try to remove the rust with the help of 100-grit sandpaper. Keep sanding the rusted surface till you can see the bare surface.
2)Now use 120-grit sandpaper for removing the paint on the area around the rust.
3)Take 150-grit sandpaper and gently send the affected area until the metal gets smooth.
4)Now isolate the area that you are going to paint by covering all other near by portions of the car’s body by tapping news on it.
5)For initial painting process, apply three coats of car primer on the affected area. Remember, there should be a gap of about 10 minutes in the application each coat of primer. After applying primer, leave the car for drying for at least 24 hours.
6)Now give the area a light coat of automotive touch-up paint. Apply enough coats of the car paint so that the premier can be made completely invisible. Remember, the paint you are using should be exactly in matching with your car’s body paint.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
13 Kasım 2011 Pazar
When To Refill Or Change Car Brake Fluid
When it comes to maintaining a car, most of us do a considerably good job by timely changing oil and air filters, and topping-up the essential fluids like brake fluid and transmission fluid. But have you ever done the same for your brake fluid? Most people don’t. In other words, despite being one of the most important fluids from the safety point of view, the brake fluids are perhaps the most neglected fluid in your car. Below are some basic information regarding the functioning of brake fluid along with reasons of its contamination.
Reason of Increasing Moisture Content: - Every time you open the master cylinder for checking the level of brake fluid, it tends to capture the moisture from the air. The high the moister content in brake fluid, the lesser its efficiency. As per the auto engineering experts, cars only one year old can have brake fluid with moisture contamination of two percent and even higher.
Affects of Increased Moisture Content: - Generally, under extreme brake uses the essential brake components including rotors, pads, drums, and shoes tend to reach the high temperatures of over 400 to 500 degree. The DOT 3 brake fluid will begin to boil when it crosses a temperature of 400 degrees. But if the moisture content in your brake fluid has been increased to up to 3 percent, its boiling temperature reduces by up to 25 percent. The basic reason behind this is that when brake fluid gets exposed to the high temperatures, the moisture content present in fluid starts turning into stream and remains as an incompressible part of fluid. This in turn reduces stopping ability of the braking system.
Harms to the Braking Efficiency: – As mentioned above, the contaminated brake fluid harms the efficiency of the overall braking system. Moreover, the excess of moisture can cause corrosion to the internal metal parts such as calipers, brake lines, wheel cylinders and pressure valves.
Experts Recommend: – According to auto engineering experts, the car brake fluid should be changed after every 40,000 km or 2 years (whichever occur earlier).
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Reason of Increasing Moisture Content: - Every time you open the master cylinder for checking the level of brake fluid, it tends to capture the moisture from the air. The high the moister content in brake fluid, the lesser its efficiency. As per the auto engineering experts, cars only one year old can have brake fluid with moisture contamination of two percent and even higher.
Affects of Increased Moisture Content: - Generally, under extreme brake uses the essential brake components including rotors, pads, drums, and shoes tend to reach the high temperatures of over 400 to 500 degree. The DOT 3 brake fluid will begin to boil when it crosses a temperature of 400 degrees. But if the moisture content in your brake fluid has been increased to up to 3 percent, its boiling temperature reduces by up to 25 percent. The basic reason behind this is that when brake fluid gets exposed to the high temperatures, the moisture content present in fluid starts turning into stream and remains as an incompressible part of fluid. This in turn reduces stopping ability of the braking system.
Harms to the Braking Efficiency: – As mentioned above, the contaminated brake fluid harms the efficiency of the overall braking system. Moreover, the excess of moisture can cause corrosion to the internal metal parts such as calipers, brake lines, wheel cylinders and pressure valves.
Experts Recommend: – According to auto engineering experts, the car brake fluid should be changed after every 40,000 km or 2 years (whichever occur earlier).
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips For Protecting Cars During Rains
The rainy season comes with a need of protecting your vehicle from getting damaged from water. Parking or driving your car on waterlogged streets can be highly dangerous for it, thus, a number of precautions are needed to be taken during this season. Below are few preventive tips in order to save your vehicle from getting damaged.
1)Insurance Cover: – The best cover for your vehicle during heavy rains is an insurance cover. Don’t forget to renew or update the insurance policy of you car so that the expense of repairing of any unfortunate damange in the car can be fully/partially reimbursed by the insurance provider. The comprehensive motor policy of a vehicle generally covers damage due to inundation, flood, earthquake etc.
2)Park at a Safe Place: – During the rainy seasons, avoid parking the car in low-lying parking lots or areas like basements. Also avoid parking the car at the areas like under a tree or hording and near a transformer. However, if the vehicle has already been damaged due to inundation or heavy rain, never try to start any electrical installation as it might cause fire in the vehicle.
3)Drive Carefully: – Driving the car roughly during heavy rains can prove very dangerous for both passengers as well as for car. Avoid driving on high speeds on waterlogged roads and try to keep a distance between the ongoing traffic. However, if you have no option left but to drive the car on a waterlogged road, keep the acceleration as moderate as possible.
4)Other Protections: – If you notice that water level out side the car is constantly increasing, avoid being seated inside the car. Turn the AC off if water level outside is considerably high. Make sure that doors and windows and back hatch of your car are fully closed at the time of parking as well as while driving on waterlogged roads.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)Insurance Cover: – The best cover for your vehicle during heavy rains is an insurance cover. Don’t forget to renew or update the insurance policy of you car so that the expense of repairing of any unfortunate damange in the car can be fully/partially reimbursed by the insurance provider. The comprehensive motor policy of a vehicle generally covers damage due to inundation, flood, earthquake etc.
2)Park at a Safe Place: – During the rainy seasons, avoid parking the car in low-lying parking lots or areas like basements. Also avoid parking the car at the areas like under a tree or hording and near a transformer. However, if the vehicle has already been damaged due to inundation or heavy rain, never try to start any electrical installation as it might cause fire in the vehicle.
3)Drive Carefully: – Driving the car roughly during heavy rains can prove very dangerous for both passengers as well as for car. Avoid driving on high speeds on waterlogged roads and try to keep a distance between the ongoing traffic. However, if you have no option left but to drive the car on a waterlogged road, keep the acceleration as moderate as possible.
4)Other Protections: – If you notice that water level out side the car is constantly increasing, avoid being seated inside the car. Turn the AC off if water level outside is considerably high. Make sure that doors and windows and back hatch of your car are fully closed at the time of parking as well as while driving on waterlogged roads.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
How To Maintain Your New Car Properly
When you buy a new car, the best you can do for it is a proper maintenance. A well maintained car last longer and performs better. Moreover, the cost of maintenance can be decreased considerably by following a few car preventive car maintenance tips. In other words you need to understand your car better and should give priority to its time to time maintenance. Let us understand what the preventive car maintenance basically is.
Preventive Maintenance: - Preventive maintenance is the kind of maintenance that prevents the essential parts of your car from wearing-out early. This is because a machine needs proper protection and that too in time. Otherwise, even a small fault can grow-up the irreparable condition and you might end-up paying more than double on getting replaced this permanently faulty part.
Tips: – There are a number of new car preventive maintenance tips that one should follow in order to keep one’s pockets from heavy workshop maintenance bills. Here are few of these essential tips.
1) Regular Oil Change: – Oil is no doubt one of the most important aspects of keeping the performance of a car engine up to the mark. The oil keeps the engine components lubricated and prevents the friction among the components. But after a long use the engine oil tends to lose its lubrication power due to the heat and mixing of dirt and metal components. Thus, oil should be changed strictly as per schedule.
2) Maintain Fluid Level: – There are a number of fluids that one should take care of in order to keep the performance their respective components up to the mark. These fluids include engine coolant fluid, transmission fluid, brake fluid and battery fluid. All of these fluids should be checked and maintained on a fortnight basis.
3) Regular Servicing: – The car should be taken to the company’s registered service center strictly as per schedule so that each and every part of the car checked/maintained in the supervision of skilled company engineers.
4) Tyre Pressure: – This is perhaps the most neglected aspect of car maintenance. Where the high tyre pressure can cause an early wear to the wheels and suspension system of the car, the low inflated tyres enhances the fuel economy by as much as 10 percent.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Preventive Maintenance: - Preventive maintenance is the kind of maintenance that prevents the essential parts of your car from wearing-out early. This is because a machine needs proper protection and that too in time. Otherwise, even a small fault can grow-up the irreparable condition and you might end-up paying more than double on getting replaced this permanently faulty part.
Tips: – There are a number of new car preventive maintenance tips that one should follow in order to keep one’s pockets from heavy workshop maintenance bills. Here are few of these essential tips.
1) Regular Oil Change: – Oil is no doubt one of the most important aspects of keeping the performance of a car engine up to the mark. The oil keeps the engine components lubricated and prevents the friction among the components. But after a long use the engine oil tends to lose its lubrication power due to the heat and mixing of dirt and metal components. Thus, oil should be changed strictly as per schedule.
2) Maintain Fluid Level: – There are a number of fluids that one should take care of in order to keep the performance their respective components up to the mark. These fluids include engine coolant fluid, transmission fluid, brake fluid and battery fluid. All of these fluids should be checked and maintained on a fortnight basis.
3) Regular Servicing: – The car should be taken to the company’s registered service center strictly as per schedule so that each and every part of the car checked/maintained in the supervision of skilled company engineers.
4) Tyre Pressure: – This is perhaps the most neglected aspect of car maintenance. Where the high tyre pressure can cause an early wear to the wheels and suspension system of the car, the low inflated tyres enhances the fuel economy by as much as 10 percent.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Smoke Smell From Car’s Interior
Sometimes, the smell of cigarette smoke just refuse to go out of your cars interior no matter how many tricks you apply. The basic reason behind this permanent smoke smell is the presence of smoke particle on or under your cars fabric. Here are few tips to get rid of smoke smell present in your car’s interior.
1)First of all test the multi-surface fabric cleaner for discoloration on any hidden spot of your car’s fabric. If everything goes well and there is no discoloration, than your fabric cleaner is up to mark for this task.
2)Now, gently spray the cleaner on fabric of your car with reaching every possible spot. Avoid over spraying the cleaner.
3)Now, take a small square size sponge and wet it in warm water. Remember, the water should not be too hot, other wise it can burn your hands and can also cause discoloring of fabric.
4)Rinse the seats with the help of this wet-sponge. Try to reach every possible corner of the seat fabric. While Rinsing, keep dipping the sponge in warm water again and again in order to keep it clean from dirt and dust. Wipe out every part of the floor carpet.
5)Now, allow your car’s interior to dry. If you have garage to keep the car than leave the car windows down overnight.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all test the multi-surface fabric cleaner for discoloration on any hidden spot of your car’s fabric. If everything goes well and there is no discoloration, than your fabric cleaner is up to mark for this task.
2)Now, gently spray the cleaner on fabric of your car with reaching every possible spot. Avoid over spraying the cleaner.
3)Now, take a small square size sponge and wet it in warm water. Remember, the water should not be too hot, other wise it can burn your hands and can also cause discoloring of fabric.
4)Rinse the seats with the help of this wet-sponge. Try to reach every possible corner of the seat fabric. While Rinsing, keep dipping the sponge in warm water again and again in order to keep it clean from dirt and dust. Wipe out every part of the floor carpet.
5)Now, allow your car’s interior to dry. If you have garage to keep the car than leave the car windows down overnight.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Warming Up a Car Battery Without a Jump Start
Many a times we ignore the importance of battery in our vehicle and thereafter face trouble because of the same. Car’s battery is quite a significant component of your vehicle and without it your car won’t start. Even the temperature affects the battery’s performance, and when the battery is at 0 degrees F, only half of the normal cranking power will be produced whereas the drop in temperature of 20 degrees F, it will raise out less power capacity. So here are some steps to warm up your battery so that you can easily start your vehicle.
Some important things you need are:
Open the hood and just check where the battery is located and the same depends on the moel of the car you are using. The battery is usually located in the four corners of the engine, so make sure you check the corners first. In case you are not able to locate the battery, you must check the details in the owner’s manual.
To easily loose the bolt you must use an adjustable wrench while holding the clamp on the negative battery terminal. You can comfortable recognize the negative clamp as it is of black color. Not what you need to do is just remove the clamp from the terminal.
Same as described above, remove the positive battery clamp from the positive battery terminal. After taking out the battery clamp gently lift the battery out of the vehicle.
You can gradually warm the battery by keeping it indoors. When the battery comes to normal temperature and is not so cold to touch, just reinstall it in your car start your vehicle.
Freezer Bag Method
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Some important things you need are:
- Adjustable wrench
- Water
- Freezer bags
- Blanket
Open the hood and just check where the battery is located and the same depends on the moel of the car you are using. The battery is usually located in the four corners of the engine, so make sure you check the corners first. In case you are not able to locate the battery, you must check the details in the owner’s manual.
To easily loose the bolt you must use an adjustable wrench while holding the clamp on the negative battery terminal. You can comfortable recognize the negative clamp as it is of black color. Not what you need to do is just remove the clamp from the terminal.
Same as described above, remove the positive battery clamp from the positive battery terminal. After taking out the battery clamp gently lift the battery out of the vehicle.
You can gradually warm the battery by keeping it indoors. When the battery comes to normal temperature and is not so cold to touch, just reinstall it in your car start your vehicle.
Freezer Bag Method
- In freezer bag method, use the hot tap water to fill up six freezer bags.
- Now place the freezer bags on top and around the cold battery placed in your car.
- Cover it with a thick blanket and wait for about half-an-hour.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Simplistic Way to Jump Start a Car with Manual Transmission on a Hill
Are you stuck in the middle of your journey to home and do not have the jumper cables to start your vehicle? Don’t get disturbed as it is quite easy to jump start your car with a manual transmission. Without jumper cables all you require to start your vehicle is a stretch of downhill road. This trick is really helpful as you are using the weight of the car to force an engine to turn over. This automatically results into a quick start up of a car without the use of any battery.
Important things you’ll require:
First is a qualified driver who can drive a manual transmission
And second is a stretch of downhill road, preferably paved
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things you’ll require:
First is a qualified driver who can drive a manual transmission
And second is a stretch of downhill road, preferably paved
- First thing you’ll need to keep in mind is to see a stretch of paved road that is downhill and free from hindrances. You are required to get the car up to approximate 10-15 mph and atleast 100 feet of downhill road to smoothly jump start the car. It will be easier if you can go quicker and faster.
- Second thing you need to do is insert the car key to the on position, place the transmission in first gear and push in the clutch. Make sure to firmly hold the clutch to the floor until you’re ready to jump start the car.
- Now take off the car down the hill so that it gains a speed of at least 10 mph or more. Better if you can ask for help and get someone to push the car so that it gains speed.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Kaydol:
Kayıtlar (Atom)