All of you must be surprising what kind of topic is this. Just ask anyone who has had the misfortune of having his car brakes failed and you will realize why I am talking about this topic. Almost every driver learns how to change a tire, but how many of you know how to stop a car if brakes failed. Only just a few, correct!
If you can stop your car without brakes, you just might head off an awful accident. You may or may not have advanced warning that your brakes will stop working; so be prepared for such an emergency by following the steps below.
1.The first tip, don’t panic. Stay calm. This will help you focus and tackle the situation in a better way.
2.Keep your eyes on the road and continue to steer. Avoid going in regions where there is pedestrians, heavy traffic or some dangerous obstacles. In case you enter in a heavy traffic area, then warn the pedestrians and other drivers by turning your hazard lights on. Plus, you can even honk the horn to make others aware that there is a problem.
3.Another tip is to pump the brakes several times so that enough pressure builds up in the braking system to help you stop the vehicle. Although this may take a time, do not give up hope and keep trying.
4.Now, shift to the lowest gear as it helps slow you by using your engine to sluggish the car. If you have a manual transmission, downshift rapidly.
5.Never forget to use the parking/emergency brake in such a condition. Don’t push or pull it suddenly, otherwise you might lose control of the vehicle completely. Apply the brake slowly and steadily. It is best to use the emergency brake after shifting the car in lowest gear.
6.Use friction to reduce the speed of vehicle. You can move the car towards the places that have dirt or gravel. However, be very careful while using friction, as sudden change of terrain can cause a car to skid.
7.If all these methods fail to work, it is the time to search for shrubbery and small trees. Try to put your car through the center of a line of saplings or shrubs, being careful not to choose a tree that is too heavy for your vehicle to go through.
8.Hit the back of another car but it should not be your first choice. If you’re going to do it, try to warn the driver of that car by honking the horn. Simultaneously, try to strike a car that is running at the similar speed as you are and strike the back.
Once you manage to stop the car, do not try to drive it again until you are sure the problem is solved.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
15 Kasım 2011 Salı
Safe Driving Tips: Safe Drive Stay Alive
Statistics shows that road accidents are one of the major causes of death today. However accidents, by nature, are inevitable, there is at least something you can do to prevent their occurrence. Below are some safe driving tips which could prevent accidents from happening.
1.The first rule is simple: don’t drive too fast than you are comfortable with!
2.Always obey traffic signals and rules. This includes do not jump the red light, never drink and drive and wearing a seat belt at all times.
3.Do not change lane suddenly while driving. Give the correct indication to your fellow drivers in order to let them know that you want to take a turn or change lane.
4.Keep optimum distance from the vehicles ahead when you are driving at high speed as this will allow you to stop in time if urgent braking is required.
5.Do not allow any interruptions like using mobile phone, listening to high volume music and talking to fellow passengers.
6.Drive slowly during rain and foggy conditions. Turn on wipers along with headlights whenever it starts raining.
7.While driving on the highway, make sure you keep proper distance from heavy vehicles as they might not be able to stop suddenly.
8.Do not overtake other vehicles unless you are absolutely sure you can do so without harming yourself or others. Don’t speed past a bus which has just stopped to depart passengers as people trying to cross the road will be blinded due to the static vehicle.
9.Take adequate rest while going for long drive to prevent exhaustion and fatigue.
10.Shift into first gear and use the emergency break when you park your car. Shift into reverse if you are parking on a downward slant.
If these tips are kept in mind when you taking your vehicle out chances are there that you will reach home safe and sound to be with your loved ones.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1.The first rule is simple: don’t drive too fast than you are comfortable with!
2.Always obey traffic signals and rules. This includes do not jump the red light, never drink and drive and wearing a seat belt at all times.
3.Do not change lane suddenly while driving. Give the correct indication to your fellow drivers in order to let them know that you want to take a turn or change lane.
4.Keep optimum distance from the vehicles ahead when you are driving at high speed as this will allow you to stop in time if urgent braking is required.
5.Do not allow any interruptions like using mobile phone, listening to high volume music and talking to fellow passengers.
6.Drive slowly during rain and foggy conditions. Turn on wipers along with headlights whenever it starts raining.
7.While driving on the highway, make sure you keep proper distance from heavy vehicles as they might not be able to stop suddenly.
8.Do not overtake other vehicles unless you are absolutely sure you can do so without harming yourself or others. Don’t speed past a bus which has just stopped to depart passengers as people trying to cross the road will be blinded due to the static vehicle.
9.Take adequate rest while going for long drive to prevent exhaustion and fatigue.
10.Shift into first gear and use the emergency break when you park your car. Shift into reverse if you are parking on a downward slant.
If these tips are kept in mind when you taking your vehicle out chances are there that you will reach home safe and sound to be with your loved ones.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips to Consider Before Starting the Engine of Your Car 0diggsdigg Co
Driving your car gives you responsibility to drive safely, not only for the passengers in your car, but for pedestrians and other drivers on the road. And as a driver your responsibility starts when you are about to start the engine of your car.
To ensure a safe and happy journey, consider doing the following before starting the engine.
1.Ensure the area around your car is clear and free of obstacles.
2.Check fluid levels such as coolant, engine oil, window washer fluid, and brake fluid as often as possible, at least whenever you refuel.
3.Make sure that all lenses and windows especially the side mirrors are clean.
4.Visually check the tires before starting the engine. If any tire looks flat, do not drive the car. Even if all the tires seem okay, you should check their pressure.
5.Lock your car doors.
6.Adjust your seat to be more comfortable, yet can still reach all of the car’s controls.
7.Adjust the position of outside mirror until the side of the car just disappears.
8.Fasten the seat belt of the car and just ensure that you hear a clicking sound.
9.Check all the warning lights and gauges are working when you start the engine.
10.And, lastly ensure that the gear is in “Neutral” position when you are using a manual transmission and in “Park” position if you have an automatic transmission.
So these are a few tips to consider before starting the engine. Follow them and enjoy the ride.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
To ensure a safe and happy journey, consider doing the following before starting the engine.
1.Ensure the area around your car is clear and free of obstacles.
2.Check fluid levels such as coolant, engine oil, window washer fluid, and brake fluid as often as possible, at least whenever you refuel.
3.Make sure that all lenses and windows especially the side mirrors are clean.
4.Visually check the tires before starting the engine. If any tire looks flat, do not drive the car. Even if all the tires seem okay, you should check their pressure.
5.Lock your car doors.
6.Adjust your seat to be more comfortable, yet can still reach all of the car’s controls.
7.Adjust the position of outside mirror until the side of the car just disappears.
8.Fasten the seat belt of the car and just ensure that you hear a clicking sound.
9.Check all the warning lights and gauges are working when you start the engine.
10.And, lastly ensure that the gear is in “Neutral” position when you are using a manual transmission and in “Park” position if you have an automatic transmission.
So these are a few tips to consider before starting the engine. Follow them and enjoy the ride.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Top 10 Tips To Avoid Distraction While Driving
Driving is a luxurious and comfortable experience, which is very pleasant until you get distracted and your journey ends up in a fatal mishap causing you to your grave. Some distractions we create ourselves and others merely enter our area of influence when we are not paying attention. Dealing with distractions while we are driving is part of the responsibility of being a safe driver. So today we are going to talk about some tips on how to avoid distraction while driving. 1.Never use a cell phone while driving even for seeing who is calling / reading a text.If you must use your mobile phone, find a safe place to pull over to do so.
2.Avoid doing multi-tasks while driving. Do not do activities like applying makeup, adjusting your music system, combing your hairs, taking your coat off or changing clothes.
3.Never read or write whilst driving. Pull over if you need to read or use a map.
4.Don’t eat or drink while driving. Doing these things actually could be the cause of a big problem.
5.Listen music at a reasonable volume and combat the urge to dance. Keeping volume too loud or using earplugs or headphones while on the road can be distracting and can prevent you from hearing a warning or the siren of emergency vehicles.
6.Roll the windows down for increased speed awareness.
7.Put seat belts on your kids or engage the child locks, and know that you can quietly concentrate on the road regardless of how much they try to rile you up.
8.Avoid lighting up or putting out cigarette, or coping with falling ash while driving.
9.Don’t retrieve something from the floor or back seat as it can draw your attention from the road.
10.Don’t attract in sceneries. Concentrate on driving.
If you’re able to avoid distractions by keeping your concentration on your driving, you’ll reduce the likelihood of being involved with an accident. You and also the other passengers are going to be pleased you probably did.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2.Avoid doing multi-tasks while driving. Do not do activities like applying makeup, adjusting your music system, combing your hairs, taking your coat off or changing clothes.
3.Never read or write whilst driving. Pull over if you need to read or use a map.
4.Don’t eat or drink while driving. Doing these things actually could be the cause of a big problem.
5.Listen music at a reasonable volume and combat the urge to dance. Keeping volume too loud or using earplugs or headphones while on the road can be distracting and can prevent you from hearing a warning or the siren of emergency vehicles.
6.Roll the windows down for increased speed awareness.
7.Put seat belts on your kids or engage the child locks, and know that you can quietly concentrate on the road regardless of how much they try to rile you up.
8.Avoid lighting up or putting out cigarette, or coping with falling ash while driving.
9.Don’t retrieve something from the floor or back seat as it can draw your attention from the road.
10.Don’t attract in sceneries. Concentrate on driving.
If you’re able to avoid distractions by keeping your concentration on your driving, you’ll reduce the likelihood of being involved with an accident. You and also the other passengers are going to be pleased you probably did.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips for Safe Driving At Night
Driving at night or at dusk can be extremely challenging and dangerous too due to low visibility. Low visibility directly affects color recognition and depth perception and this in turn causes car accident. It is a well-established fact that road accidents are three times greater at night than during daytime.
However, there are several ways to effectively reduce the risks of night driving. Below are some tips that can improve your safety in the dark for both drivers and pedestrians.
1.First tip is to prepare your car for driving at night. Clean the signal lights, headlights, and taillights once a week. While driving, turn them on 1 hour before sunset and keep them on 1 hour after sunrise for maximum visibility.
2.Refrain from flashing your high beams at a vehicle that has their high beams on; this will lessen their visibility and is much more likely to cause an accident.
3.Make sure that all the exterior lights of your car are in proper working order so that others can see you clearly.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
4.Don’t stare directly at the oncoming headlights as it will further impair your night vision, even after the vehicle has gone.
5.Keep all interior lights off. Any kind of light inside the car will seem very bright and will make it more difficult to see.
6.Adjust your side or rearview mirror to avoid the glare of headlights from a vehicle following you.
7.Also keep the windshield and windows of your car clean as dust deposited on them can cause glare that further decreases visibility.
8.Driving at night is more exhausting than day driving. So, make sure that there is proper ventilation inside the car and you also take regular breaks in between in the case of a long ride.
9.Don’t drink and drive. Not only does alcohol harshly impair your driving ability, but it also acts as a depressant. You should also avoid smoking when you drive because Smoke’s nicotine and carbon monoxide hampers night vision.
10.Ensure to lock doors and roll up windows of your car. Do not talk or allow strangers ride with you because most cases of crime occur at night.
11.Keep your car in tip-top condition for maximum safety. Regularly check tire pressure, fluid levels and brake pads.
By following these tips, you can defend yourself, your passengers, and other people on the road after the sun goes down.
Have a safe trip!
However, there are several ways to effectively reduce the risks of night driving. Below are some tips that can improve your safety in the dark for both drivers and pedestrians.
1.First tip is to prepare your car for driving at night. Clean the signal lights, headlights, and taillights once a week. While driving, turn them on 1 hour before sunset and keep them on 1 hour after sunrise for maximum visibility.
2.Refrain from flashing your high beams at a vehicle that has their high beams on; this will lessen their visibility and is much more likely to cause an accident.
3.Make sure that all the exterior lights of your car are in proper working order so that others can see you clearly.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
4.Don’t stare directly at the oncoming headlights as it will further impair your night vision, even after the vehicle has gone.
5.Keep all interior lights off. Any kind of light inside the car will seem very bright and will make it more difficult to see.
6.Adjust your side or rearview mirror to avoid the glare of headlights from a vehicle following you.
7.Also keep the windshield and windows of your car clean as dust deposited on them can cause glare that further decreases visibility.
8.Driving at night is more exhausting than day driving. So, make sure that there is proper ventilation inside the car and you also take regular breaks in between in the case of a long ride.
9.Don’t drink and drive. Not only does alcohol harshly impair your driving ability, but it also acts as a depressant. You should also avoid smoking when you drive because Smoke’s nicotine and carbon monoxide hampers night vision.
10.Ensure to lock doors and roll up windows of your car. Do not talk or allow strangers ride with you because most cases of crime occur at night.
11.Keep your car in tip-top condition for maximum safety. Regularly check tire pressure, fluid levels and brake pads.
By following these tips, you can defend yourself, your passengers, and other people on the road after the sun goes down.
Have a safe trip!
Tips for a Safe and Happy Long Drive
It would be pleasure to have time for trips and long drives, right? You will be able to relax and take your mind off from all the hustle and bustle of daily life. While travelling, you want to ensure that everything will go perfectly as planned. If in case you will be embarking on a long drive, here are a few tips for a hassle free journey to your destination.
The health of your car is of extreme importance when you are going on a long drive. Before proceeding with your journey, check your car thoroughly. Check the tires, including the spare and make sure that it has sufficient air pressure before you leave your home. Check the steering, brakes and car engine. Make sure your fuel tank is full. Finally, ensure that the horn, signal lights, headlights and wipers are working in good condition. Stock your car with emergency kit and tools so you will be ready for anything.
Before leaving, it is also advisable to check the coolant and the battery of your car. If the coolant of your car’s engine is not working well, it may harm your engine. When it comes to battery, it typically lasts for 3- 5 years only; depending on how well you maintain it. So if you are planning for a long journey and you know the battery is on its fourth year or fifth already, it is wise to go with a new spare battery or even replace it before your trip.
Don’t drive continuously without a break. You as well as your vehicle need some rest. Fatigue reduces your concentration, can make you less tolerant of other drivers and increase your risk of an accident. Pull over and take breaks every two or three hours, even if you don’t feel sleepy. Take a snack, stretch your legs, and get some fresh air by walking around. If needed, take a quick nap, 2 cups of coffee or high energy caffeinated drinks and turning the radio on might also help. Avoid alcohol and heavy meals, which can make you sluggish.
The above tips will not just ensure that your tour will be hassle free; you will also be able to reach your destination safely.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
The health of your car is of extreme importance when you are going on a long drive. Before proceeding with your journey, check your car thoroughly. Check the tires, including the spare and make sure that it has sufficient air pressure before you leave your home. Check the steering, brakes and car engine. Make sure your fuel tank is full. Finally, ensure that the horn, signal lights, headlights and wipers are working in good condition. Stock your car with emergency kit and tools so you will be ready for anything.
Before leaving, it is also advisable to check the coolant and the battery of your car. If the coolant of your car’s engine is not working well, it may harm your engine. When it comes to battery, it typically lasts for 3- 5 years only; depending on how well you maintain it. So if you are planning for a long journey and you know the battery is on its fourth year or fifth already, it is wise to go with a new spare battery or even replace it before your trip.
Don’t drive continuously without a break. You as well as your vehicle need some rest. Fatigue reduces your concentration, can make you less tolerant of other drivers and increase your risk of an accident. Pull over and take breaks every two or three hours, even if you don’t feel sleepy. Take a snack, stretch your legs, and get some fresh air by walking around. If needed, take a quick nap, 2 cups of coffee or high energy caffeinated drinks and turning the radio on might also help. Avoid alcohol and heavy meals, which can make you sluggish.
The above tips will not just ensure that your tour will be hassle free; you will also be able to reach your destination safely.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Guide to Safe Driving In the Rain
Driving in the rain is not as easy as driving under a clear weather. When the road is wet, the tires lose their grip on the road and your perception is considerably reduced – it is harder to see other vehicles, road signs and the road itself. In case you get into this situation, try to drive the car carefully. Here are some tips for arriving at your destination safely if you must travel when the weather is less than favorable.
1.The first tip to consider when faced with rain is to maintain your speed at a moderate level. This would protect you since the roads are more slippery due to the flowing water.
2.Turn on your headlights even in a light rain. It helps you see the road as well as let other drivers to know your presence from a distance and avoid an accident.
3.Stay toward the middle lane as water tends to puddle in the outside lanes. If you go through these large puddles, you may be harming your engine by allowing water to splatter into it.
4.Try to stay away from large tires vehicles such as trucks and buses. The tires of these vehicles can cause a larger amount of water to spray from them, which could impair your vision. Be careful when passing them as well; if you must overtake, do so safely and quickly.
5.Never drive beyond the limits of visibility. If the rain becomes too heavy that you can barely see the car in front of you, pull over to a safe place and wait until the rain subsides.
6.Make sure that the windshield wipers are in working condition before you drive against the falling rain. Ensure to change the wiper blades when needed. This tool offers greater visibility even with the heavy rainstorm.
7.Brake earlier with lesser force than you would normally. This increases the stopping distance between you and the vehicle ahead, and signals to the driver behind that you’re slowing down.
8.Make sure to prepare your car for the drive if you know that you are going to be driving in rainy conditions. Apply a coat of rain-repellent on your windshield, as it will improve your visibility in the rain. Also be sure that windshield wiper fluid bottle is full, as this can help you to remove any dirt that may come from the wet road conditions.
The best possible way to reduce the chances of mishap in rain is to stay at home as far as possible. But this is not always possible. Sometimes, it becomes necessary to drive in rains. By keeping the above tips in mind, you can at least have a great chance of having a safe drive in the downpours.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1.The first tip to consider when faced with rain is to maintain your speed at a moderate level. This would protect you since the roads are more slippery due to the flowing water.
2.Turn on your headlights even in a light rain. It helps you see the road as well as let other drivers to know your presence from a distance and avoid an accident.
3.Stay toward the middle lane as water tends to puddle in the outside lanes. If you go through these large puddles, you may be harming your engine by allowing water to splatter into it.
4.Try to stay away from large tires vehicles such as trucks and buses. The tires of these vehicles can cause a larger amount of water to spray from them, which could impair your vision. Be careful when passing them as well; if you must overtake, do so safely and quickly.
5.Never drive beyond the limits of visibility. If the rain becomes too heavy that you can barely see the car in front of you, pull over to a safe place and wait until the rain subsides.
6.Make sure that the windshield wipers are in working condition before you drive against the falling rain. Ensure to change the wiper blades when needed. This tool offers greater visibility even with the heavy rainstorm.
7.Brake earlier with lesser force than you would normally. This increases the stopping distance between you and the vehicle ahead, and signals to the driver behind that you’re slowing down.
8.Make sure to prepare your car for the drive if you know that you are going to be driving in rainy conditions. Apply a coat of rain-repellent on your windshield, as it will improve your visibility in the rain. Also be sure that windshield wiper fluid bottle is full, as this can help you to remove any dirt that may come from the wet road conditions.
The best possible way to reduce the chances of mishap in rain is to stay at home as far as possible. But this is not always possible. Sometimes, it becomes necessary to drive in rains. By keeping the above tips in mind, you can at least have a great chance of having a safe drive in the downpours.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Fabulous Monsoon Driving Tips to Make Your Long Drive Safe & Pleasurable
The monsoon has arrived and now is the right time to make your precious car ready for all those choked potholes filled with dirty water and filth. And your car, which is serving you from so many years, also needs to get ready for the monsoon driving so that it can skip the sudden breakdown and makes your rainy day a time to enjoy rather than a regretful event of your car’s break down day. So before your car encounters the rough and wet terrains better make it prepared for all those monsoon days.
First you need to check the wipers of the car. Car wipers are the most neglected part of a car and people always think that it would operate absolutely fine in any season, however that is not true because they too need care especially at the time of monsoon. And so cleaning the wiper at the time of washing the car is essential so that they do not get jammed and the twigs or little branches caught in the blades are removed. This will actually make the wiper blades work efficiently during the heavy rains or monsoons. Carrying a newspaper to clean the glass for optimum visibility is great plus make sure that the washer fluid is topped up because it’s the great life saving element for the monsoons. And if your car is new and facing the monsoon rains for the first time then drive slowly as the wheels require little time to obtain traction on wet roads.
Tires are the next to be watched. On wet roads, especially in the initial days of rainy season it’s difficult for the tires to grip the road effectively due to less friction. And therefore it’s important to check the tread life of the tires before going out for a drive because your vehicle may slide cause of imbalance. So check the tires for sure and also maintain sufficiently enough tread life, about 2-3 mm. Also see that the correct tire pressure is maintained at all times as per your manufacturer’s details mentioned in the manual. Proper aligning of the wheels is also crucial before the rainfall gets heavier.
Next you have to check the car’s rubber beadings and mounts near the door frame that actually prevent the rain water from entering inside the car. But overtime they do get spoilt and beading are worn out so before the monsoon season arrives, just fix them properly and it can easily done by you with the help of a fevistick. But incase if you are not able to fix them then better take your car to an authorized dealer in order to replace the rubber beadings.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
First you need to check the wipers of the car. Car wipers are the most neglected part of a car and people always think that it would operate absolutely fine in any season, however that is not true because they too need care especially at the time of monsoon. And so cleaning the wiper at the time of washing the car is essential so that they do not get jammed and the twigs or little branches caught in the blades are removed. This will actually make the wiper blades work efficiently during the heavy rains or monsoons. Carrying a newspaper to clean the glass for optimum visibility is great plus make sure that the washer fluid is topped up because it’s the great life saving element for the monsoons. And if your car is new and facing the monsoon rains for the first time then drive slowly as the wheels require little time to obtain traction on wet roads.
Tires are the next to be watched. On wet roads, especially in the initial days of rainy season it’s difficult for the tires to grip the road effectively due to less friction. And therefore it’s important to check the tread life of the tires before going out for a drive because your vehicle may slide cause of imbalance. So check the tires for sure and also maintain sufficiently enough tread life, about 2-3 mm. Also see that the correct tire pressure is maintained at all times as per your manufacturer’s details mentioned in the manual. Proper aligning of the wheels is also crucial before the rainfall gets heavier.
Next you have to check the car’s rubber beadings and mounts near the door frame that actually prevent the rain water from entering inside the car. But overtime they do get spoilt and beading are worn out so before the monsoon season arrives, just fix them properly and it can easily done by you with the help of a fevistick. But incase if you are not able to fix them then better take your car to an authorized dealer in order to replace the rubber beadings.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Teen Driving Safety Tips
Teenage is that time of life when bravery is at the peak. Even on the road. Teenagers often do not care about their own lives. Limited experience in driving is the root cause of teen car accidents. While the process of getting a license may be extensive and every effort is made to teach teenagers about the lots of risks involved in driving, there are many of them on the road who forgets it all in a wink. Teens must be very careful and follow various safety tips while driving. Here are a few Tips for Safe Teen Driving. 1.Do not use your cell phone while driving unless you’re equipped with a hands-free device.Pull off the road if you must take or make calls. .
2.Don’t send or read text messages while driving. Doing so diverts your attention from the road.
3.Obey the speed limit, driving too fast gives you less time to react or stop. Leave early for your destination to avoid speeding or driving in a hurry. Excess speed is a major cause of teenage accidents.
4.Avoid empty gossiping when travelling with friends. While doing a conversation is not a threat but drawing attention from driving to chit chat is a bad thing. It is vital that the driver is alert always to avoid any impending risks.
5.Do not drive when angry or upset. Emotions can interfere with safe driving. Ensure that no matter how angry you are you must cool down before you hit the road.
6.Don’t comb your hair or put on make-up, even if you are stopped at traffic lights as it may grab your attention.
7.Don’t drink and drive, and don’t travel with anyone who has been drinking. As a teen you are not allowed to be driving with any drug or alcohol as it can impair driving and judgment.
8.Set up your music system before starting the car and keep the volume down. Singing with loud music and changing the song or station are two of the main reasons teenagers get into accidents. These activities can take your attention away from driving.
Vehicle crashes are the prime cause of deaths for teens. If you do not pay your full attention to driving a vehicle, bad things can happen very quickly. Keep your attention focused on driving and enjoy your ride.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2.Don’t send or read text messages while driving. Doing so diverts your attention from the road.
3.Obey the speed limit, driving too fast gives you less time to react or stop. Leave early for your destination to avoid speeding or driving in a hurry. Excess speed is a major cause of teenage accidents.
4.Avoid empty gossiping when travelling with friends. While doing a conversation is not a threat but drawing attention from driving to chit chat is a bad thing. It is vital that the driver is alert always to avoid any impending risks.
5.Do not drive when angry or upset. Emotions can interfere with safe driving. Ensure that no matter how angry you are you must cool down before you hit the road.
6.Don’t comb your hair or put on make-up, even if you are stopped at traffic lights as it may grab your attention.
7.Don’t drink and drive, and don’t travel with anyone who has been drinking. As a teen you are not allowed to be driving with any drug or alcohol as it can impair driving and judgment.
8.Set up your music system before starting the car and keep the volume down. Singing with loud music and changing the song or station are two of the main reasons teenagers get into accidents. These activities can take your attention away from driving.
Vehicle crashes are the prime cause of deaths for teens. If you do not pay your full attention to driving a vehicle, bad things can happen very quickly. Keep your attention focused on driving and enjoy your ride.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Few Significant Tricks to Remain Alert Behind The Wheels
Car road trips are always monotonous, especially when it’s long, require daily travelling, there is too much of traffic etc. and these are actually few of the reasons behind the monotony. Of course long distance trips are full of fun and enjoyment if you are travelling with your family but hours of driving can lead to boredom and exhaustion. Even business trips are said to render monotony and lack of interest and it’s not always convenient and easy to stop and rest for a while or take a small break in between the tiring journeys. During a long distance trip, experienced drivers easily come to know the phase of fatigue and when it is grabbing their body, and they understand the safety aspect of driving with the importance of intervention.
There are various conditions that cause fatigue while driving especially for an extended period of time. The motorist is required to stay alert all the time while driving but tiredness is bound to take hold sooner or later depending on the energy level of the driver. Few of the conditions that cause drowsiness or fatigue are adverse weather, night driving, long hours of driving, heavy traffic, driving on the same route, having a heavy meal before driving, lack of sleep etc. So here are few significant tricks for the drivers to stay alert on road while driving.
1.Change the position of your seating and move yourself with little stretching. Moving your muscles is an ideal way to be alert.
2.Listen music and turn the radio on for some interactive actions in order to keep your mind alert and body out of fatigue. You can even engage yourself in some of your favorite old recording of jokes or nursery rhymes recited by your children.
3.Engage yourself in some talks or conversation, converse with the passengers or involve in some general discussions.
4.Chew a mint gum and enjoy its refreshing taste, sucking fresh mint leaves can actually boost alertness as peppermint and cinnamon cuts fatigue.
5.Coffee is the best option to keep you alert so grab a strong cup of coffee for that immediate boost. If Coffee is not what’s your preference you can go for any of the caffeinated beverage.
6.Simple deep breathing and few finger exercises can also make you defeat drowsiness.
7.Reciting and narrating to oneself enhances alertness and eliminates sleepy feeling.
8.Lastly if possible, drive only when you are fresh and had enough of good sleep. Starting for a journey early in the morning when you are completely refreshful is the idle time to drive because lack of sleep is the major cause behind drowsiness.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
There are various conditions that cause fatigue while driving especially for an extended period of time. The motorist is required to stay alert all the time while driving but tiredness is bound to take hold sooner or later depending on the energy level of the driver. Few of the conditions that cause drowsiness or fatigue are adverse weather, night driving, long hours of driving, heavy traffic, driving on the same route, having a heavy meal before driving, lack of sleep etc. So here are few significant tricks for the drivers to stay alert on road while driving.
1.Change the position of your seating and move yourself with little stretching. Moving your muscles is an ideal way to be alert.
2.Listen music and turn the radio on for some interactive actions in order to keep your mind alert and body out of fatigue. You can even engage yourself in some of your favorite old recording of jokes or nursery rhymes recited by your children.
3.Engage yourself in some talks or conversation, converse with the passengers or involve in some general discussions.
4.Chew a mint gum and enjoy its refreshing taste, sucking fresh mint leaves can actually boost alertness as peppermint and cinnamon cuts fatigue.
5.Coffee is the best option to keep you alert so grab a strong cup of coffee for that immediate boost. If Coffee is not what’s your preference you can go for any of the caffeinated beverage.
6.Simple deep breathing and few finger exercises can also make you defeat drowsiness.
7.Reciting and narrating to oneself enhances alertness and eliminates sleepy feeling.
8.Lastly if possible, drive only when you are fresh and had enough of good sleep. Starting for a journey early in the morning when you are completely refreshful is the idle time to drive because lack of sleep is the major cause behind drowsiness.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Avoid the Risk, Just Don’t Eat & Drink While Driving
Your treasured vehicle is so very important, right, as it takes you to the desired location or to that meeting, which is quite crucial to attend on time. So better carry it safe as it is crafted for some purpose and let that purpose remain same of commuting instead of making it a place to enjoy stuff like eating or drinking. The charm of driving is somewhat distinctive and also requires proper attention so that any road mishappening is avoided. Apart from eliminating any misfortunes, it’s better to keep the eatables away from your vehicle in order to get rid of bad odors, sticky seats and unclean interiors. Imagine how overwhelming it is to drive a refreshing car instead of experiencing cheesy aroma in the car while driving. So avoid eating in the car and maintain its freshness with hygienic aura. Also follow below mentioned tips for keeping your car smell good and refreshing
1.Always keep an air freshener in your car. There are many choices available in the market and you can select any of your favorite aromas. Apart from car fragrance dispensers, it’s good to carry a can of air freshener as well. The best time to spray the air freshener in your car is before locking it up at night.
2.There are times when you have to eat and drink in the car especially during a long drive or travelling in your vehicle to another city, so better roll down the windows during your snack time to avoid that smell being seized in your interiors. You can even halt for few minutes at any of the nearest park or parking space to have your meal outside the car.
3.Keep the hand wipes in your car and take use of them for cleaning up any immediate stain on the seat or interiors plus wipe your hands as well so that the dirty hands do not unclean your interiors. Also before grabbing your steering wheel, gear or stereo, make sure that your hands are completely clean and free from dirt.
4.Vacuum and clean the interiors thoroughly at least once a week so that nothing is left inside the corners and nooks of the car as those leftovers can stink up your vehicle.
5.Once in a while go for car detailing services and hire a specialized expert who can perform interior detailing job. This will actually help your car get rid of stains, odor and greases, rendering you a fresh glowing car with shining interiors.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1.Always keep an air freshener in your car. There are many choices available in the market and you can select any of your favorite aromas. Apart from car fragrance dispensers, it’s good to carry a can of air freshener as well. The best time to spray the air freshener in your car is before locking it up at night.
2.There are times when you have to eat and drink in the car especially during a long drive or travelling in your vehicle to another city, so better roll down the windows during your snack time to avoid that smell being seized in your interiors. You can even halt for few minutes at any of the nearest park or parking space to have your meal outside the car.
3.Keep the hand wipes in your car and take use of them for cleaning up any immediate stain on the seat or interiors plus wipe your hands as well so that the dirty hands do not unclean your interiors. Also before grabbing your steering wheel, gear or stereo, make sure that your hands are completely clean and free from dirt.
4.Vacuum and clean the interiors thoroughly at least once a week so that nothing is left inside the corners and nooks of the car as those leftovers can stink up your vehicle.
5.Once in a while go for car detailing services and hire a specialized expert who can perform interior detailing job. This will actually help your car get rid of stains, odor and greases, rendering you a fresh glowing car with shining interiors.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Unwanted Stickers Glued On A Car
Gluing of the unwanted stickers on parked car is perhaps one of the most common problems faced by the owners. It just degraded the road presence of your car and sometimes can even restrict proper outside visibility. It can happen any where be it a shopping mall parking or be it your car parked at your door step. And in today’s marketing oriented world, these unwanted stickers have almost become unavoidable. So, whenever it happens to you, don’t scratch the sticker in panic as it can harm the original paint of your car. Instead, try to follow these simple but essential instructions to remove these stickers.
Using Denatured Alcohol: – Rub the sticker with a paper towel dipped into denatured alcohol solution. Rub out the residues of stickers with the help of a razor, however, be careful and avoid rubbing the original paint of the car. Both razor and denatured alcohol solution should be kept out of children’s reach.
Using Cooking Oil: – It is probably one of the most simple and effective ways of removing a car sticker. All you need to do is apply a small quantity of oil on the sticker and wait for a while till the oil fully penetrates the sticker. Now you will be able to remove the sticker very easily with the help of a razor or a window scrapper.
Using White Vinegar: – Most of you may not be aware of it, but the white vinegar solution can prove highly helpful in getting rid of an unwanted sticker glued on your car. Keep a white vinegar dipped paper towel on the sticker you want to remove for 20 minutes and the sticker will come out very easily.
Using Fabric Softener: – The liquid fabric softener mixed with acetone (nail paint remover) in a 50:50 ratio can clean out a sticker effectively with the help of a window scrapper or a razor.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Using Denatured Alcohol: – Rub the sticker with a paper towel dipped into denatured alcohol solution. Rub out the residues of stickers with the help of a razor, however, be careful and avoid rubbing the original paint of the car. Both razor and denatured alcohol solution should be kept out of children’s reach.
Using Cooking Oil: – It is probably one of the most simple and effective ways of removing a car sticker. All you need to do is apply a small quantity of oil on the sticker and wait for a while till the oil fully penetrates the sticker. Now you will be able to remove the sticker very easily with the help of a razor or a window scrapper.
Using White Vinegar: – Most of you may not be aware of it, but the white vinegar solution can prove highly helpful in getting rid of an unwanted sticker glued on your car. Keep a white vinegar dipped paper towel on the sticker you want to remove for 20 minutes and the sticker will come out very easily.
Using Fabric Softener: – The liquid fabric softener mixed with acetone (nail paint remover) in a 50:50 ratio can clean out a sticker effectively with the help of a window scrapper or a razor.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips To Touch-Up Paint Scratches Of A Car
The dents and scratches on a car’s body have become inevitable in today’s heavy traffic conditions. Sometimes even small scratches on any part of a car’s body like doors or hood can prove real road presence spoiler for your car. A scratch, no matter how small or how big, should be fixed immediately as it can not only leave an ugly rust spot on the car but can also damage the body paint in a longer run. Here are some simple instructions to touch up these unfortunate scratches on a car’s body.
Preparation: – For touching-up a scratch on a car you need to have necessary tools and supplies for the task that comprises of a brush cap bottle of paint similar to your car’s color, automotive touch-up clear gloss, rubbing compound, solution of mild soap and water, wire brush and de-greaser.
Procedure: –
1) First of all clean the affected area with help of mild soap and water. Dip a clothe in the soap-water solution and clear the scratched spot carefully. Even small remaining of dust or dirt can ruin-up all the handwork you done while touching it up. You can take help of de-greaser to remove the grease/wax from the affected area, if required.
2) If the scratch is a few days old and rust has started surfacing on the scratched area, use a wire brush to remove the rust. You can also take the help of rush treatment chemical if the wire brush is not effective.
3) After cleaning the rust, its time to give the rust spot a light coat of automotive touch-up clear gl0ss and allow the paint to go dry completely.
4) Now its time to do the most fun part of this touch-up exercise. Apply a few coats of color paint on the affected area. Remember every coat should have at least 20 minutes gap.
5) As soon as the color paint goes dry, its time to apply a few coats of clear gloss paint (again with a 20 minutes gap).
6) The touched-up area would take at least 48 hours to go dry completely. After that, rub the rubbing compound on the newly painted area with the help of a soft cotton cloth.
7) Congratulations! You have done what could have easily costed you a few thousand rupees at a car repairing garage.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Preparation: – For touching-up a scratch on a car you need to have necessary tools and supplies for the task that comprises of a brush cap bottle of paint similar to your car’s color, automotive touch-up clear gloss, rubbing compound, solution of mild soap and water, wire brush and de-greaser.
Procedure: –
1) First of all clean the affected area with help of mild soap and water. Dip a clothe in the soap-water solution and clear the scratched spot carefully. Even small remaining of dust or dirt can ruin-up all the handwork you done while touching it up. You can take help of de-greaser to remove the grease/wax from the affected area, if required.
2) If the scratch is a few days old and rust has started surfacing on the scratched area, use a wire brush to remove the rust. You can also take the help of rush treatment chemical if the wire brush is not effective.
3) After cleaning the rust, its time to give the rust spot a light coat of automotive touch-up clear gl0ss and allow the paint to go dry completely.
4) Now its time to do the most fun part of this touch-up exercise. Apply a few coats of color paint on the affected area. Remember every coat should have at least 20 minutes gap.
5) As soon as the color paint goes dry, its time to apply a few coats of clear gloss paint (again with a 20 minutes gap).
6) The touched-up area would take at least 48 hours to go dry completely. After that, rub the rubbing compound on the newly painted area with the help of a soft cotton cloth.
7) Congratulations! You have done what could have easily costed you a few thousand rupees at a car repairing garage.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
How To Clean Car Battery Terminals
Sometimes, even a thin layer of corroded materials and gunk on or around battery terminals can completely stop the flow of battery current in the car’s ignition system, in result car refuses to start. A gooey substance starts forming on battery due to acid condensation that can not only make the performance of your car troublesome but can also affect the battery life. Thus, whenever, you find this kind of substance on the surface of your battery, its time to give the battery terminals a clean-up. Here are few instructions for the cleaning of battery terminals.
Preparation:- For the effective and safe cleaning of your car battery terminals you will be needing a number of things that comprises of rubber gloves, screw driver, razor blade, stiff-bristled brush, electrical tape, sodium bicarbonate (baking soda) or cola.
Instructions: -
1) Exposing your hands to the battery chemicals can prove very dangerous, so first of all wear a good quality of gloves to prevent your hands from coming in direct contact with acid.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2) Now, carefully rub the battery terminals with the help of stiff-bristled brush. For scratching the inside of ring terminals, you can take help of a pointed tool like screw driver.
3) Now its tie to check the wiring. Check the condition of the wires leading into the battery. If a whitish of greenish powder like substance has started forming under the copper wire sheeting than its time to cut-out the corroded wire. Cut open the housing of the copper wire by about ½ inch so that the shiny copper can be brought-out.
4) Now, stick-down the copper wires to the terminals with the help of electrical tape. The wires should be carefully tucked in and should not move from its place.
5) Now comes the most fun part of the battery cleaning task. Pour the baking soda-water solution on the terminals and try the rub-out the junk on the terminals.
Preparation:- For the effective and safe cleaning of your car battery terminals you will be needing a number of things that comprises of rubber gloves, screw driver, razor blade, stiff-bristled brush, electrical tape, sodium bicarbonate (baking soda) or cola.
Instructions: -
1) Exposing your hands to the battery chemicals can prove very dangerous, so first of all wear a good quality of gloves to prevent your hands from coming in direct contact with acid.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2) Now, carefully rub the battery terminals with the help of stiff-bristled brush. For scratching the inside of ring terminals, you can take help of a pointed tool like screw driver.
3) Now its tie to check the wiring. Check the condition of the wires leading into the battery. If a whitish of greenish powder like substance has started forming under the copper wire sheeting than its time to cut-out the corroded wire. Cut open the housing of the copper wire by about ½ inch so that the shiny copper can be brought-out.
4) Now, stick-down the copper wires to the terminals with the help of electrical tape. The wires should be carefully tucked in and should not move from its place.
5) Now comes the most fun part of the battery cleaning task. Pour the baking soda-water solution on the terminals and try the rub-out the junk on the terminals.
Use Of Nitrogen In Pressurizing Car Tyres
Using the Nitrogen gas for inflating the tyres is a relatively new concept. Thus, one should adopt it or not has always been much debatable topic among the auto experts. Nitrogen is basically a non-toxic gas that is tasteless, colorless and odorless gas that accounts for over 78 percent of the earth’s atmosphere. The Nitrogen gas is used in a number of automobiles to inflate the tyres including racing cars, HCVs (heavy commercial vehicles) and even aircrafts. Where some auto experts say that using Nitrogen is beneficial, there are some who says it has many disadvantages. Here we have tried to pin point some of the pros and cons of using Nitrogen gas for inflating the tyres
Pros:-
1) Nitrogen helps in keeping the temperature of tyre low while car is running on a high speed or heavy load. The reason is the high moister content of Nitrogen that reduces the overall running temperature of the tyre.
2) The Nitrogen falls a bit lighter as compared to the normal air which helps in improving the overall ride quality of the tyres because of its lesser un-sprung weight.
3) It has also been claimed that the use of nitrogen enhances the overall engine life in a longer run by reducing the operating temperature.
4) Nitrogen leaks a bit slower as compared to the compressed air and thus the rate of pressure loss falls slower while using Nitrogen.
5) Oxygen causes oxidation and rust formation by reacting with the tyre and rim materials. On the other hand, Nitrogen is an inert gas so there is no possibility of any type of reaction with metal.
Cons:-
1) Nitrogen falls quite costly.
2) As it is a relatively new concept, its filling stations are very low in numbers and are not available in most of the filling stations of the country.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Pros:-
1) Nitrogen helps in keeping the temperature of tyre low while car is running on a high speed or heavy load. The reason is the high moister content of Nitrogen that reduces the overall running temperature of the tyre.
2) The Nitrogen falls a bit lighter as compared to the normal air which helps in improving the overall ride quality of the tyres because of its lesser un-sprung weight.
3) It has also been claimed that the use of nitrogen enhances the overall engine life in a longer run by reducing the operating temperature.
4) Nitrogen leaks a bit slower as compared to the compressed air and thus the rate of pressure loss falls slower while using Nitrogen.
5) Oxygen causes oxidation and rust formation by reacting with the tyre and rim materials. On the other hand, Nitrogen is an inert gas so there is no possibility of any type of reaction with metal.
Cons:-
1) Nitrogen falls quite costly.
2) As it is a relatively new concept, its filling stations are very low in numbers and are not available in most of the filling stations of the country.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips For Changing Car Timing Belt
Timing belt which is also called the cam belt is basically a chain that is used for interchange of rotary and linear motion when the vehicle needs to maintain a specific drive ratio or has to balance heavy-weight. When it comes to replacing the timing belt, most car owners prefer it to be done with the help of a skilled mechanic as it is not any easy task. However, if you are apt with the car repairing, you can change a speed belt by following a certain procedure. Here are few steps for which will certainly help you knowing the process of timing belt change procedure.
1)First of all remove the connection of battery along with removing the cap of distributor. Keep the position sensor of the Top Dead Center (TDC) as referred in the repair manual.
2)Make sure that the rotor should be exactly in line with the distributor housing’s index mark. Now rotate the engine in such a way that the timing mark provided on the camshaft pulley can be kept in line with the ‘zero’ mark.
3)Now its time to unlock the bolts and screws and other parts which are needed to be removed in order reach the time belt and change it. You can take help of the repair manual for the same.
4)Keep in mind that you don’t have to remove the timing belt tensioner and the mounting bolts, instead, just loosen them up. Tighten the mounting bolts after moving away the tensioner, so that it can be kept on its place.
5)Now the belt tensioner can be easily slide-off. After sliding-of the tensioner remove the timing belt.
6)Just reverse the process after replacing the old timing belt with new one. Keep a close eye on the position of pulley as it should be right on zero mark during the changing process.
7)Take help of the repair manual for information on how hard to torque the tensioner and other bolts.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all remove the connection of battery along with removing the cap of distributor. Keep the position sensor of the Top Dead Center (TDC) as referred in the repair manual.
2)Make sure that the rotor should be exactly in line with the distributor housing’s index mark. Now rotate the engine in such a way that the timing mark provided on the camshaft pulley can be kept in line with the ‘zero’ mark.
3)Now its time to unlock the bolts and screws and other parts which are needed to be removed in order reach the time belt and change it. You can take help of the repair manual for the same.
4)Keep in mind that you don’t have to remove the timing belt tensioner and the mounting bolts, instead, just loosen them up. Tighten the mounting bolts after moving away the tensioner, so that it can be kept on its place.
5)Now the belt tensioner can be easily slide-off. After sliding-of the tensioner remove the timing belt.
6)Just reverse the process after replacing the old timing belt with new one. Keep a close eye on the position of pulley as it should be right on zero mark during the changing process.
7)Take help of the repair manual for information on how hard to torque the tensioner and other bolts.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Basic Tips For Adjusting Car’s Carburetor
For a person who drives a car, merely knowing how to drive is not enough as sometime incomplete knowledge about how to deal with little faults can prove highly troublesome. One should have enough knowledge of the tasks with which a car owner encounters most commonly such as changing a tyre or adjusting a carburetor. Below are some easy tips on adjusting a car’s carburetor which will certainly help you in getting full information and performing the task efficiently.
1)Bring the car’s engine on its normal operating temperature by turning it on for a few minutes. Don’t forget to turn the engine off before you start working upon its carburetor.
2)Remember that till the car’s engine will not be warmed-up fully, the carburetor can’t be adjusted correctly.
3)Now carefully remove the cover, base and filter of air filter so that you can reach to the carburetor section.
4)Now, turn the ignition on again and tighten the idle adjustment screw (provided below the fast idle cam) by a half clockwise turn.
5)Wait for at least 30 seconds after adjusting the idle screw. Now, see the readings of tachometer (located on the car’s dashboard) and check the RPM.
6)Remember that where screwing the idle adjustment will increase the idle speed of the car, unscrewing will decrease it. Set the idle speed where you want it to be by loosening the same screw a bit.
7)Usually, the carburetor should be adjusted at 850 RPMs. But if you have to adjust it over 1000 RPM than there is some other issue in the car.
8 )Keep in mind that the high you set the carburetor, the more fuel car engine consumes. Thus, avoid setting it on a too high level.
9)Now, replace the air filter assembly carefully and close the hood.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)Bring the car’s engine on its normal operating temperature by turning it on for a few minutes. Don’t forget to turn the engine off before you start working upon its carburetor.
2)Remember that till the car’s engine will not be warmed-up fully, the carburetor can’t be adjusted correctly.
3)Now carefully remove the cover, base and filter of air filter so that you can reach to the carburetor section.
4)Now, turn the ignition on again and tighten the idle adjustment screw (provided below the fast idle cam) by a half clockwise turn.
5)Wait for at least 30 seconds after adjusting the idle screw. Now, see the readings of tachometer (located on the car’s dashboard) and check the RPM.
6)Remember that where screwing the idle adjustment will increase the idle speed of the car, unscrewing will decrease it. Set the idle speed where you want it to be by loosening the same screw a bit.
7)Usually, the carburetor should be adjusted at 850 RPMs. But if you have to adjust it over 1000 RPM than there is some other issue in the car.
8 )Keep in mind that the high you set the carburetor, the more fuel car engine consumes. Thus, avoid setting it on a too high level.
9)Now, replace the air filter assembly carefully and close the hood.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips To Hot Wire A Car’s IgnitionHot wiring is basically starting a car by tapping two wires of cars electrical system together, in case one has lost the keys of his car. The method is most commonly used by thieves or the criminals for stealing the car. You must have seen this type of seen in many movies in which male protagonist try to start the car haphazardly, by joining two wires fixed under the steering. However, hot wiring a car falls very handy in case the ignition system of the car has gone faulty or if someone has lost the keys of his car. Here are few tips to hot wire a car. 1) Before touching any wire, try your luck by taking the help of small screw driver for starting the car. It is advisable to keep an emergency tool kit which contains tools like small screw driver. Insert the screwdriver in the key hole as you insert the key. If you are fortunate enough, the car will get started, otherwise, hot wiring is the only option left. 2) Remember, the vehicle should be in neutral during this whole hotwiring exercise, otherwise you might end up having a serious injury or damaging the car badly. 3) Try to locate the wires fixed right under the steering wheel. There will be two wires which are responsible for starting the ignition system. Trying different color wire combinations will be of no help until unless you know what exactly the color code is for your car model. 4) It is strongly advised that one should not touch any of the wire with bare hands because the powerful electrical charge of these wires can electrocuted very badly. Thus, one shouldn’t touch any of the wire. 5) Now, care fully strip the insulated portion of top of both of the wires and touch them with each other lightly. Try the same for a few times until the ignition gets started. As soon as car’s ignition gets started, separate the wires again and accelerate the car lightly to keep the engine running. 6) Don’t forget to carefully place the wires carefully out of reach of your body and any metal component
Useful Tips For Painting A Car
Buying a new car is a considerably heavy investment and most people buy it for at least 4 to 5 years as not everyone can afford a new car every other year. No matter how well you maintain the car, its exterior paint starts going dull and peeling-out and there comes a time when the tattered exterior of your car starts embarrassing you. But selling it and buying a new one is not the only solution left when you have a very easy as well as very economical way-out of getting it repainted. You can either get it repainted at a car garage or do the task at your home itself. Painting the car will not only help you in getting rid of any old patches or scratches but will also give the car a completely new avatar. Below are the tips for owners who are planning to paint their car at their home itself.
Preparation:-
1) For painting a car at home, you will need a number of items including wax/grease remover, primer, wire, body putty, spray gun, urethane-based paint, clear coat paint, water and spare clothes.
2) Wash you car properly before painting so that the possibility of slightest speck of dust o dirt can be removed.
3) Use grease/wax remover if there are any grease or wax spots on car’s exterior.
Process –
1) First of all smoothen out the car’s exterior by rubbing sand papers on rough patches.
2) There should be no static left on the car’s exterior so that it does not catch any more dust particles.
3) The parts, to which you don’t want to paint should be well covered with the help of masking tape.
4) Just before you start painting a car, wipe clean it with help of a soft cloth and dry the car’s body out, completely.
5) If there are patches on year car’s body, even those out with the help of body putty.
6) Now, evenly apply the primer throughout the surface of your car.
7) Now again its time to scrub the primer with the help of a send paper. Make sure that when you stop scrubbing, the outer surface of the car should be absolutely even.
Painting:-
1) First of all, (for body color) apply the urethane-based paint on the car’s body. Take help of the spray gun for the base coat.
2) Now wait for at least 15 minutes so that the base-coat dry-out completely.
3) Apply one more coat of color paint on car and wait for at least one hour.
4) As soon as the color coat dries-up apply three clear coats by keeping a gap of 15 minutes in each coat.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Preparation:-
1) For painting a car at home, you will need a number of items including wax/grease remover, primer, wire, body putty, spray gun, urethane-based paint, clear coat paint, water and spare clothes.
2) Wash you car properly before painting so that the possibility of slightest speck of dust o dirt can be removed.
3) Use grease/wax remover if there are any grease or wax spots on car’s exterior.
Process –
1) First of all smoothen out the car’s exterior by rubbing sand papers on rough patches.
2) There should be no static left on the car’s exterior so that it does not catch any more dust particles.
3) The parts, to which you don’t want to paint should be well covered with the help of masking tape.
4) Just before you start painting a car, wipe clean it with help of a soft cloth and dry the car’s body out, completely.
5) If there are patches on year car’s body, even those out with the help of body putty.
6) Now, evenly apply the primer throughout the surface of your car.
7) Now again its time to scrub the primer with the help of a send paper. Make sure that when you stop scrubbing, the outer surface of the car should be absolutely even.
Painting:-
1) First of all, (for body color) apply the urethane-based paint on the car’s body. Take help of the spray gun for the base coat.
2) Now wait for at least 15 minutes so that the base-coat dry-out completely.
3) Apply one more coat of color paint on car and wait for at least one hour.
4) As soon as the color coat dries-up apply three clear coats by keeping a gap of 15 minutes in each coat.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Alignment Of Car Wheels
Wheel alignment is basically adjustment of the angles of the wheel in order to poise them perpendicular to the ground and parallel to each other. Maintaining the proper alignment of the wheels not only enhances the life of the tyres but also makes the drive of the car smooth. With aligned tyres, car runs straight on roads and the life of tyres increase in a longer run. In addition to this, driving a car with unaligned tyres needs some additional efforts from the driver’s side that can seriously tire out the driver on a long drive.
The proper alignment of car tyres depend on three factors Camber, Caster and Toe. Here is a brief information of these components along with the problems the can create if not aligned.
1) Caster: – A caster is basically the top most tilting of the steering axis that can be seen from the side of a car either backward or in front of a car. Though a caster doesn’t cause / influence the wear of the tires, but it is responsible for the directional control of the steering wheel. The factors that affect position of caster include overloading and a weak sagging rear. Whenever the back side of a car remains lower than its trim height, the suspension of the front started tilting backward. Exactly reverse of it happens when the back side of a car remains a bit higher compared to its trim height. In either case, the steering of the car feels an odd stagnating force during high speed.
2) Camber: – The tilting of tyres that you can see from the front is Camber. Same as Caster, the Camber can be in any of the tilting outwards and tilting inwards position. The proper setting of camber falls essential in not only maintaining the directional control of the tyres, but also saves the tyres from wearing-out. The outwards tilting camber causes quick wear and tear of car’s suspension system and outside portion of the tyres. On the contrary, if the camber is tilting inwards excessively, it causes wear on the inward portion of the tyres and excessive wear on the tyres.
3) Toe: – Sometimes one can find the front or rear or both of the wheels tilted inwards or out wards. The measurement of this tilting from their straight ahead position is called the Toe. When the Toe is not adjusted correctly it causes wear and tear to the suspension system and tyres. It can also become a cause of steering imbalances.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
The proper alignment of car tyres depend on three factors Camber, Caster and Toe. Here is a brief information of these components along with the problems the can create if not aligned.
1) Caster: – A caster is basically the top most tilting of the steering axis that can be seen from the side of a car either backward or in front of a car. Though a caster doesn’t cause / influence the wear of the tires, but it is responsible for the directional control of the steering wheel. The factors that affect position of caster include overloading and a weak sagging rear. Whenever the back side of a car remains lower than its trim height, the suspension of the front started tilting backward. Exactly reverse of it happens when the back side of a car remains a bit higher compared to its trim height. In either case, the steering of the car feels an odd stagnating force during high speed.
2) Camber: – The tilting of tyres that you can see from the front is Camber. Same as Caster, the Camber can be in any of the tilting outwards and tilting inwards position. The proper setting of camber falls essential in not only maintaining the directional control of the tyres, but also saves the tyres from wearing-out. The outwards tilting camber causes quick wear and tear of car’s suspension system and outside portion of the tyres. On the contrary, if the camber is tilting inwards excessively, it causes wear on the inward portion of the tyres and excessive wear on the tyres.
3) Toe: – Sometimes one can find the front or rear or both of the wheels tilted inwards or out wards. The measurement of this tilting from their straight ahead position is called the Toe. When the Toe is not adjusted correctly it causes wear and tear to the suspension system and tyres. It can also become a cause of steering imbalances.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Effective Tips For Cleaning Car Radiator
Radiator is one of the most important components of a car’s engine cooling system and its proper functioning is very important for proper cooling of the engine of a car. It cools down the engine by circulating the water through a number of pipes. Where the water level in the cooling system is recommended to be checked and maintained on a weekly basis, the radiator should be flushed at least on a half yearly basis. Though taking the help of a trained mechanic or a service station for repairing the radiator of a car is the best way to get it fine-tuned, but the same can be performed at home itself if you follow the above given instruction properly.
1) Move your car to an evenly leveled surface and cover-up the engine with the help of a plastic sheet so that the water splashes can be stopped from going where it doesn’t belong.
2) Now, remove the radiator cap along with disconnecting the upper and lower hoses. Now take out the water by turning on the tap at the bottom of the radiator. If the water coming out of radiator is dirty than the radiator is needed to be flushed with clear water again.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
3) Now give the radiator a reverse flush in which the water should be forced from bottom and should come out from the top of radiator. Now again flush the radiator from top along with cleaning the engine cooling jacket.
4) Once you are done with the flushing process, close the radiator and reinstall the hoses. Now fill the radiator with coolant again.
5) Before installing the radiator take a closer look at its cap for any leaks and see if it is needed to be replaced or not.
6) After installing the radiator, now start the car and take it for a small ride and take a look at it if the cooling system is functioning properly. After stopping the car, now check the cooling system for any leaks while keeping the engine running.
1) Move your car to an evenly leveled surface and cover-up the engine with the help of a plastic sheet so that the water splashes can be stopped from going where it doesn’t belong.
2) Now, remove the radiator cap along with disconnecting the upper and lower hoses. Now take out the water by turning on the tap at the bottom of the radiator. If the water coming out of radiator is dirty than the radiator is needed to be flushed with clear water again.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
3) Now give the radiator a reverse flush in which the water should be forced from bottom and should come out from the top of radiator. Now again flush the radiator from top along with cleaning the engine cooling jacket.
4) Once you are done with the flushing process, close the radiator and reinstall the hoses. Now fill the radiator with coolant again.
5) Before installing the radiator take a closer look at its cap for any leaks and see if it is needed to be replaced or not.
6) After installing the radiator, now start the car and take it for a small ride and take a look at it if the cooling system is functioning properly. After stopping the car, now check the cooling system for any leaks while keeping the engine running.
10 Basic Tips For Changing Car Tyre
Tyres are the only component in a car’s whole body that continuously keeps in contact with surface and because of it they remain highly prone to the faults and deformities. That is why, it is very essential for every car owner to have knowledge of how to change a flat tyre. Knowledge not only makes you self dependent but also fall very essential when tyre of your car burst’s out during a long journey. Below are few tips for changing a car tyre. 1) Remember, changing a tyre is not possible without the help of a number of right tools including a jack and a wheel brace.
2) Whenever, the tyre of your car goes flat, the first step should be pulling it over to a safe area (away from traffic). Also, don’t forget to turn on the hazard / parking lights and applying the hand bakes. To be on safer side, put a rock piece or a brick beneath the other side tyres of the car.
3) The first step should be getting down on your knees and try to find small grooves where the jack needs to be positioned. Now, try to shift some of the vehicle’s weight from flat tyre by turning the handle slowly.
4) Keep in mind that while changing a car tyre, applying right technique much more crucial than using your strength.
5) Unfasten the nuts of the tyre you are going to replace before applying jack. For loosening-up the nuts place the wheel-brace on any of the nut and turn it anticlockwise. You might have to fit on the nuts in case it refuses to budge easily.
6) Now slowly jack-up the car so that the tyre can be inflated fully.
7) Lift the wheel out of the car after removing all of the nuts. Again if wheel refuses to come out due to corrosion, install it back on a single nut and give it a good kick so that it can easily come out.
8 ) Now care fully put the new tyre into the bolts keeping the air valve’s face on your side. First tighten all the bolts with your hand and than use a small pinch of wheel brace to tight them further. Don’t tight nuts fully at this step as the car is yet to jacked-down on that wheel.
9) Now care fully jack down the car and use full strength to tighten the nuts further.
10)Don’t forget to remove the rock / brick to which you had placed beneath the tyres. Also carefully place the jack in side the car on its original place.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2) Whenever, the tyre of your car goes flat, the first step should be pulling it over to a safe area (away from traffic). Also, don’t forget to turn on the hazard / parking lights and applying the hand bakes. To be on safer side, put a rock piece or a brick beneath the other side tyres of the car.
3) The first step should be getting down on your knees and try to find small grooves where the jack needs to be positioned. Now, try to shift some of the vehicle’s weight from flat tyre by turning the handle slowly.
4) Keep in mind that while changing a car tyre, applying right technique much more crucial than using your strength.
5) Unfasten the nuts of the tyre you are going to replace before applying jack. For loosening-up the nuts place the wheel-brace on any of the nut and turn it anticlockwise. You might have to fit on the nuts in case it refuses to budge easily.
6) Now slowly jack-up the car so that the tyre can be inflated fully.
7) Lift the wheel out of the car after removing all of the nuts. Again if wheel refuses to come out due to corrosion, install it back on a single nut and give it a good kick so that it can easily come out.
8 ) Now care fully put the new tyre into the bolts keeping the air valve’s face on your side. First tighten all the bolts with your hand and than use a small pinch of wheel brace to tight them further. Don’t tight nuts fully at this step as the car is yet to jacked-down on that wheel.
9) Now care fully jack down the car and use full strength to tighten the nuts further.
10)Don’t forget to remove the rock / brick to which you had placed beneath the tyres. Also carefully place the jack in side the car on its original place.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Changing Spark Plugs Of A Car
A worn out spark plug is a commonly faced problem by the car owners. Sometimes it happens that car just refuses to start due to wearing out of spark plug completely. In that condition, the spark plug is needed to be replaced by a new one. A spark plug can be replaced at home if you follow the below given instructions carefully. Also, if you are not very much into these repairing and replacing thing that you can take help of a skilled mechanic for the same. 1) Taking help of repair manual always fall essential in the replacement of the components like spark plug. Otherwise, starting off anything haphazardly, you might end up creating an even bigger fault instead of replacing the spark plug.
2) Before starting the process, make sure that the engine is cool and ignition is off. Keep in mind that working on spark plug while the engine is still hot, can cause series burns on any part of your body.
3) Choose a single spark plug to change at a time. For taking off the spark plug wire, grab it from the bottom instead of pulling the wire from top.
4) Clean the dust or oil gathering on or around the spark plug, if any. Remember that the oil inside the spark plug hole should not be wiped from there.
5) You will need the tools like 5/8 deep socket, swivel joint and an extension for taking out the plug. You have to turn the plug to its left with the help of these tools to loosen it up.
6) Now, replace the old plug with the new one. You need to turn the new plug to its tight for tightening it.
7) While connecting the spark plug wire make sure that it shouldn’t off.
8 ) Repeat the same process with the other spark and replace it.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
2) Before starting the process, make sure that the engine is cool and ignition is off. Keep in mind that working on spark plug while the engine is still hot, can cause series burns on any part of your body.
3) Choose a single spark plug to change at a time. For taking off the spark plug wire, grab it from the bottom instead of pulling the wire from top.
4) Clean the dust or oil gathering on or around the spark plug, if any. Remember that the oil inside the spark plug hole should not be wiped from there.
5) You will need the tools like 5/8 deep socket, swivel joint and an extension for taking out the plug. You have to turn the plug to its left with the help of these tools to loosen it up.
6) Now, replace the old plug with the new one. You need to turn the new plug to its tight for tightening it.
7) While connecting the spark plug wire make sure that it shouldn’t off.
8 ) Repeat the same process with the other spark and replace it.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Ways To Improve The Performance Of A Car Engine
Every car owner knows that how important it is to properly maintain the engine of a car. The car engine is needed to be serviced and maintained strictly as per the schedule. Irregular servicing can seriously damage not only the engine but also other systems of the car. Sometimes, neglecting even a small fault inside the car can cause serious damage to the engine system. Thus, giving a few hours to the maintenance of a car and taking it for the servicing as per schedule will not only keep the performance of the car up to the mark, but will also save you from heavy workshop bills. Here are few tips for keeping the performance of a car up to the mark.
1) In order to getting rid from the back-pressure in the exhaust system, a second exhaust valve can be used. Some auto experts also suggest using headers, free flowing mufflers and big tail pipes for the purpose.
2) For making the cooling system of a car more effective, an intercooler can be used. The intercooler is basically an advanced radiator that cools the compresses the compressed air before it enters for cooling. The cool air expands comparatively more when it enters into the cylinder.
3) Those, who give more preference to the power over the mileage of a car, can use a high compression ratio of engine. The higher compression ration enhances the production of the power in engine. However, using the high combustion ration can cause spontaneous bursting of air-fuel mixture into flame, even before the spark plug ignites it. Using high octane gasoline can solve this problem up to a certain extant.
4) The high power can also be achieved by increasing the engine cc (displacement). It can be achieved by increasing the number of cylinders in the engine. The more you increase the displacement, the more power engine starts producing.
5) Nowadays, there is a trend of using the turbochargers and / or superchargers for enhancing the power out put of the engine. These chargers pressurize the incoming air in order to cram more air into the engine.
6) Avoid overloading, as it not only affect the performance of engine but also cause an early wear and tear to a number of engine parts.
7) The engine power can also be increased by reducing the air resistance. The air intake or resistance caused at the time of intake stroke of the piston can be reduced by using twin intake valves in each cylinder.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1) In order to getting rid from the back-pressure in the exhaust system, a second exhaust valve can be used. Some auto experts also suggest using headers, free flowing mufflers and big tail pipes for the purpose.
2) For making the cooling system of a car more effective, an intercooler can be used. The intercooler is basically an advanced radiator that cools the compresses the compressed air before it enters for cooling. The cool air expands comparatively more when it enters into the cylinder.
3) Those, who give more preference to the power over the mileage of a car, can use a high compression ratio of engine. The higher compression ration enhances the production of the power in engine. However, using the high combustion ration can cause spontaneous bursting of air-fuel mixture into flame, even before the spark plug ignites it. Using high octane gasoline can solve this problem up to a certain extant.
4) The high power can also be achieved by increasing the engine cc (displacement). It can be achieved by increasing the number of cylinders in the engine. The more you increase the displacement, the more power engine starts producing.
5) Nowadays, there is a trend of using the turbochargers and / or superchargers for enhancing the power out put of the engine. These chargers pressurize the incoming air in order to cram more air into the engine.
6) Avoid overloading, as it not only affect the performance of engine but also cause an early wear and tear to a number of engine parts.
7) The engine power can also be increased by reducing the air resistance. The air intake or resistance caused at the time of intake stroke of the piston can be reduced by using twin intake valves in each cylinder.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Diagnosing Car Brake Problems
As we all aware of it, even a minor fault in the braking system can prove highly dangerous to both passengers and vehicle itself. Thus, whenever you see a fault with braking system of your car, get it fixed as soon as possible from a trained mechanic. However, there are a lot of thing that an owner can himself do in order to keep the braking system fine tuned from any possible fault. By simply diagnosing the car brakes, you can not only make out some of the potential faults with the car but can also increase their life considerably. Below are some simple guidelines for maintaining and trouble shooting the car braking system.
1) Low Fluid Level :- The brake fluid inside the container should always remain close to the maximum level. If the level of brake fluid has dipped below the minimum mark, it is possible that the brake pads have been worn-out. The other possible reason can be the leakage of fluid. In either case, for the sack of car and its braking system, you should not drive the car when brake fluid is low.
2) Locked Brakes :- If the car bends sharply to a side whenever you brake, or if even pressing brakes lightly cause lock-up of wheels than there can be issues with disc caliper, brake pads or wheel bearings. Thus, whenever you face this problem get the braking system fine tuned as soon as possible so that the possibility of a severe damage can be negated.
3) Braking pulls the car to its left/right :- The problem generally occurs due to sticking brake calipers. However, sometimes the faulty suspension system of the car causes the same problem. Either case, the fault should be repaired as soon as possible.
4) Grinding like noise From Wheels:- In this case, it is possible that some unwanted particles have stuck in brakes. To prevent this, you might have to replace the brake rotors. Regular servicing of brake system is recommended to prevent this situation.
5)Brake Pads Get Spongy:- If the brake pads of your car have got spongy, it means that it’s time to get them replace with the newer ones. Spongy brake pads denote that the pads have started wearing out and are no longer able to stop the car properly.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1) Low Fluid Level :- The brake fluid inside the container should always remain close to the maximum level. If the level of brake fluid has dipped below the minimum mark, it is possible that the brake pads have been worn-out. The other possible reason can be the leakage of fluid. In either case, for the sack of car and its braking system, you should not drive the car when brake fluid is low.
2) Locked Brakes :- If the car bends sharply to a side whenever you brake, or if even pressing brakes lightly cause lock-up of wheels than there can be issues with disc caliper, brake pads or wheel bearings. Thus, whenever you face this problem get the braking system fine tuned as soon as possible so that the possibility of a severe damage can be negated.
3) Braking pulls the car to its left/right :- The problem generally occurs due to sticking brake calipers. However, sometimes the faulty suspension system of the car causes the same problem. Either case, the fault should be repaired as soon as possible.
4) Grinding like noise From Wheels:- In this case, it is possible that some unwanted particles have stuck in brakes. To prevent this, you might have to replace the brake rotors. Regular servicing of brake system is recommended to prevent this situation.
5)Brake Pads Get Spongy:- If the brake pads of your car have got spongy, it means that it’s time to get them replace with the newer ones. Spongy brake pads denote that the pads have started wearing out and are no longer able to stop the car properly.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Basic Differences Between Electric and Normal Cars
As the rising temperature of the earth has posed a threat to our environment, everyone is talking about going environment friendly by using eco-friendly products and adopting green technologies in their daily life. Going in the same line, the car makers around the world are developing cars that run on eco-friendly technologies such as electric and hybrid cars. In last few years, there has been a considerable rise in the customer quarries related to basic difference between the sales of electric cars and traditional petrol/diesel run cars. Here we have tried to differentiate the electric and normal fuel run cars on basic factors.
1)Emission: – As we all know, the electric cars carry a very low or negligible emission level and don’t emit Co2 in the environment unlike their petrol run counterparts. The excessive emission of Co2 ultimately contributes in increase the greenhouse effect.
2)Fuel Economy: – The electric cars offer much better fuel economy when compared to the same of their petrol/diesel counterparts. The reason is that the cost of electricity used in electric cars falls much cheaper as against the cost of fuel (petro/diesel) used in normal cars.
3)Maintenance: - The electric cars need comparatively less maintenance cost when compared to the same of their petrol run counterparts. The reason is that the normal car carry a much sophisticated engine system that requires a much more effort and money to be maintained, such as regular oil changes, changing of oil and air filters etc. On the other hand, the electric cars simply run on the power of a battery that is needed to be changed in a few years time.
4)Distance Covered: – Where the electric car can only be driven up to a distance of 150 to 180 kms in a single charge, the petrol run cars can be driven hundreds of kms on a full tank. Also filling stations for petrol/diesel run cars are much higher in density and can be found easily.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)Emission: – As we all know, the electric cars carry a very low or negligible emission level and don’t emit Co2 in the environment unlike their petrol run counterparts. The excessive emission of Co2 ultimately contributes in increase the greenhouse effect.
2)Fuel Economy: – The electric cars offer much better fuel economy when compared to the same of their petrol/diesel counterparts. The reason is that the cost of electricity used in electric cars falls much cheaper as against the cost of fuel (petro/diesel) used in normal cars.
3)Maintenance: - The electric cars need comparatively less maintenance cost when compared to the same of their petrol run counterparts. The reason is that the normal car carry a much sophisticated engine system that requires a much more effort and money to be maintained, such as regular oil changes, changing of oil and air filters etc. On the other hand, the electric cars simply run on the power of a battery that is needed to be changed in a few years time.
4)Distance Covered: – Where the electric car can only be driven up to a distance of 150 to 180 kms in a single charge, the petrol run cars can be driven hundreds of kms on a full tank. Also filling stations for petrol/diesel run cars are much higher in density and can be found easily.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
How to enhance the performance of your car
The performance, fuel economy and longevity of your car remain directly related to the way you drive and maintain it. There are a number of dos and don’ts that one should follow in order ensure an uninterrupted performance throughout the car’s life. By simply following the user manual provided with the car, you can get the most out of your car.
Here are few more driving habits that fall highly essential in enhancing the performance of a car.
1)Proper Start: – Most people are not aware that just by starting a car properly, one can enhance its longevity substantially. The Jackrabbit starts not only cause early wear to the obvious components but there also remains a possibility of creation of major fault in essential any component.
2)Drive Conservatively yet Regularly: – Every time you drive be easy on brakes and accelerator. It will not only enhance the fuel economy of the car but will also enhance the longevity of related components such as braking system. Drive the car on a regular basis in order to keep the battery charged and to avoid rust on the brake rotor.
3)Keep an Eye on Tyre Pressure: – Most people are not aware that riding the vehicle on low-inflated tyres can decrease its fuel economy by as much as 10 percent. On the other hand, the excessively inflated tyres cause hard and bumpy ride even on flat highways, and cause early wear of treads. Thus, to avoid this, check the pressure in your tyres on a weekly basis.
4)Avoid Clutch Riding: – When you ride a car on clutch by holding in the clutch unnecessary, it can cause early wear of clutch springs. Always remember that, slowing down a car is the duty of brakes, and one must avoid using clutch or transmission for the purpose.
5)Regular Oil Change and Servicing: – It is very important for the engine to change engine oil as per schedule. The older the engine oil grows the lesser its lubrication power becomes. Thus, for making sure the proper lubrication of the engine components, the oil should be change strictly as per schedule. The same goes true with the servicing. The servicing of a car includes thorough checking, fault finding and repairing, and replacement of wore out components. Thus, regular servicing falls very important for a cars performance and life.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Here are few more driving habits that fall highly essential in enhancing the performance of a car.
1)Proper Start: – Most people are not aware that just by starting a car properly, one can enhance its longevity substantially. The Jackrabbit starts not only cause early wear to the obvious components but there also remains a possibility of creation of major fault in essential any component.
2)Drive Conservatively yet Regularly: – Every time you drive be easy on brakes and accelerator. It will not only enhance the fuel economy of the car but will also enhance the longevity of related components such as braking system. Drive the car on a regular basis in order to keep the battery charged and to avoid rust on the brake rotor.
3)Keep an Eye on Tyre Pressure: – Most people are not aware that riding the vehicle on low-inflated tyres can decrease its fuel economy by as much as 10 percent. On the other hand, the excessively inflated tyres cause hard and bumpy ride even on flat highways, and cause early wear of treads. Thus, to avoid this, check the pressure in your tyres on a weekly basis.
4)Avoid Clutch Riding: – When you ride a car on clutch by holding in the clutch unnecessary, it can cause early wear of clutch springs. Always remember that, slowing down a car is the duty of brakes, and one must avoid using clutch or transmission for the purpose.
5)Regular Oil Change and Servicing: – It is very important for the engine to change engine oil as per schedule. The older the engine oil grows the lesser its lubrication power becomes. Thus, for making sure the proper lubrication of the engine components, the oil should be change strictly as per schedule. The same goes true with the servicing. The servicing of a car includes thorough checking, fault finding and repairing, and replacement of wore out components. Thus, regular servicing falls very important for a cars performance and life.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Easy Tips For Cleaning Car’s Interior
People often overlook cleaning a car from inside as it is the cleaning of exterior that remains on the top priority all the time. The interior of a car can be cleaned efficiently at home with the help of a vacuum cleaner and a few household things. Here are few helpful tips for cleaning a car from inside.
1)For cleaning the car interior, you will need the following materials:-
3)You will need a hose attachment of a shop vacuum for cleaning the dust. It can be purchased from any hardware or electronic equipment supplier in your local area.
4)Now, efficiently vacuum cushions of all seats. In order to remove all the dust from the seats you need the pay special attention on the crevices, bottoms and back side of the seats. Before starting vacuuming, clean the trash beneath the seats. After cleaning seats, it’s time to vacuum the floor of the car.
5)Now vacuum the floor mats and shake them well before re-fitting them inside the car.
6)Now, if there are stains of the seat fabric or on carpets, you will need carpet shampoo for removing them. Gently apply the small quantity of carpet shampoo to the stain with the help of a damp towel. Now, with the help of a damp sponge clear away the shampoo from stain. Avoid using carpet shampoo on leather
7)Now, its time to clean the windows with the help of a window cleaner and paper towels. Wipe-clean the dash board and doors by using vinyl protectant with the help of a towel.
8 )Allow the car to air-dry.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)For cleaning the car interior, you will need the following materials:-
- Vacuum cleaner
- Fabric or Carpet Shampoo
- Window cleaner
- Car-interior or vinyl protectant
- Cotton Towel
3)You will need a hose attachment of a shop vacuum for cleaning the dust. It can be purchased from any hardware or electronic equipment supplier in your local area.
4)Now, efficiently vacuum cushions of all seats. In order to remove all the dust from the seats you need the pay special attention on the crevices, bottoms and back side of the seats. Before starting vacuuming, clean the trash beneath the seats. After cleaning seats, it’s time to vacuum the floor of the car.
5)Now vacuum the floor mats and shake them well before re-fitting them inside the car.
6)Now, if there are stains of the seat fabric or on carpets, you will need carpet shampoo for removing them. Gently apply the small quantity of carpet shampoo to the stain with the help of a damp towel. Now, with the help of a damp sponge clear away the shampoo from stain. Avoid using carpet shampoo on leather
7)Now, its time to clean the windows with the help of a window cleaner and paper towels. Wipe-clean the dash board and doors by using vinyl protectant with the help of a towel.
8 )Allow the car to air-dry.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing A Broken Car Key
Sometimes the car key gets stuck in the ignition lock or door lock of the car and when one tries to pull it back, it breaks-off in the lock itself. Now you have two options, call an expensive locksmith, or give it a try yourself. In case, you have decided to do it yourself, here are few helpful tips for you. Remember, you will need a lot of patience while doing this, as it may prove a little frustrating in some cases.
1)First of all try to pull out the broken key by spraying some lubricant into the lock. The lubricant reduces the friction between broken key and the lock to a very low level.
2)If the key doesn’t come out, place a thin hacksaw/blade into the lock with teeth positioned as per the key’s position. If your key’s groove are located at the top of the lock that insert the hacksaw with the teeth facing upwards. Conversely, if the key grooves facing downwards, than hacksaw should be inserted with teeth facing downwards. The hacksaw should be inserted on the right side of the broken key.
3) Now carefully turn the hacksaw as per the positing of the key. If key-grooves are facing upwards than turn the blade slightly to the left. Turn the hacksaw right if grooves of the key are facing down.
4) Now carefully pull the hacksaw out of the lock along with broken key. Repeat the same process till you successfully bring a small part of the key peeking out of hole.
5) Now you will be needing needle-nose pliers for grasping the broken key out of the key-hole. Keep gently pulling the broken key out till it come out completely.
6) However, if you are still not able to pull the broken key out of the hole than its better to call a local locksmith for the purpose.
7)All these steps should be followed gently as rough use of tools can cause a severe damage to the lock itself.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all try to pull out the broken key by spraying some lubricant into the lock. The lubricant reduces the friction between broken key and the lock to a very low level.
2)If the key doesn’t come out, place a thin hacksaw/blade into the lock with teeth positioned as per the key’s position. If your key’s groove are located at the top of the lock that insert the hacksaw with the teeth facing upwards. Conversely, if the key grooves facing downwards, than hacksaw should be inserted with teeth facing downwards. The hacksaw should be inserted on the right side of the broken key.
3) Now carefully turn the hacksaw as per the positing of the key. If key-grooves are facing upwards than turn the blade slightly to the left. Turn the hacksaw right if grooves of the key are facing down.
4) Now carefully pull the hacksaw out of the lock along with broken key. Repeat the same process till you successfully bring a small part of the key peeking out of hole.
5) Now you will be needing needle-nose pliers for grasping the broken key out of the key-hole. Keep gently pulling the broken key out till it come out completely.
6) However, if you are still not able to pull the broken key out of the hole than its better to call a local locksmith for the purpose.
7)All these steps should be followed gently as rough use of tools can cause a severe damage to the lock itself.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Cleaning Car Seat Cushions
The seat cushions tend to catch dust and dirt over a period of time and if not cleaned for a long time they start spoiling the interior environment of the car with their bad smell and dirty looks. The simple solution of this problem is vacuuming them as frequent as on a monthly basis. Here are few instructions for efficient cleaning of the car cushions.
1)First of all remove any of the large debris, food items, any other trash in trash bags, toys etc. from the car’ interior so that the seat cushions can be easily reached and cleaned.
2)Now use a vacuum cleaner for vacuuming the seats. Try to cover as much area of seats as possible along with cleaning between the curves and edges. Also clean the area hosting cup holders, arm rests and head rests.
3)Now its time to clean the dirty grease spots with a proper dish detergent. It will also come handy in cleaning the food stains like spots left by sauces.
4)After cleaning the grease spots, clean the other spots of dirt, crayon ,ink (if any) etc. with the help of a quality fabric stain remover. Try to remove the dirty area gently with the help of a damp rag, with using a good quality detergent cleaner.
5)Now again clean the car seats with the help of vaccume cleaner. Try to cover maximum area of the seats while vacuuming. You are surely going to admire the clean cushions of your car
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all remove any of the large debris, food items, any other trash in trash bags, toys etc. from the car’ interior so that the seat cushions can be easily reached and cleaned.
2)Now use a vacuum cleaner for vacuuming the seats. Try to cover as much area of seats as possible along with cleaning between the curves and edges. Also clean the area hosting cup holders, arm rests and head rests.
3)Now its time to clean the dirty grease spots with a proper dish detergent. It will also come handy in cleaning the food stains like spots left by sauces.
4)After cleaning the grease spots, clean the other spots of dirt, crayon ,ink (if any) etc. with the help of a quality fabric stain remover. Try to remove the dirty area gently with the help of a damp rag, with using a good quality detergent cleaner.
5)Now again clean the car seats with the help of vaccume cleaner. Try to cover maximum area of the seats while vacuuming. You are surely going to admire the clean cushions of your car
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Repairing Car Key Scratches
Sometimes an unintentional run-over of the car key on the body of the car leaves behind an ugly scratch on the car’s body. In most of the cases, you don’t need to do a new paint job for removing these scratches. In order to figure-out the extant of the damage caused to car body paint by this scratch, you need to do a short analysis of the affected area. Here are few instructions for analyzing and repairing these types of scratches.
Removing Surface Scratches: –
1) The key scratch on your car’s body is very light if you can’t feet it through running your finger on it.
2) Clean the affected area by using a proper water soap solution and thoroughly rinse it. Dry the area by using a micro fiber rag.
3) Now, take light cut pad of your oscillating polisher’s disc. Now run the polisher along the length of this scratch, very gently. Run the polisher until it completely removes the scratches.
Removing Light Scratches:-
1) If you can feel the scratch through running your finger nail on it, the scratch is light one and will need a bit more effort to mend it.
2) First clean the area with the help of soap and water and rinse it thoroughly with water. Dry the area with a micro fiber rag.
3) Now, take heavy cut pad of your oscillating polisher’s disc and put an small amount of light cut compound on the pad. Now, take the foam polishing pad on your oscillating polisher and Finish with it.
4) Now take polishing compound on the pad and run it through the affected area until scratch disappears completely.
Removing Deep Scratches: – For mending these marks, you need to do a light paint touch-up on the affected area. Buy touch-up paint as per the make and model of your car. The paint should be exactly in matching with the shed and metallic look of your cars body. Follow the instructions provided in the car paint touch-up manual.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Surface Scratches: –
1) The key scratch on your car’s body is very light if you can’t feet it through running your finger on it.
2) Clean the affected area by using a proper water soap solution and thoroughly rinse it. Dry the area by using a micro fiber rag.
3) Now, take light cut pad of your oscillating polisher’s disc. Now run the polisher along the length of this scratch, very gently. Run the polisher until it completely removes the scratches.
Removing Light Scratches:-
1) If you can feel the scratch through running your finger nail on it, the scratch is light one and will need a bit more effort to mend it.
2) First clean the area with the help of soap and water and rinse it thoroughly with water. Dry the area with a micro fiber rag.
3) Now, take heavy cut pad of your oscillating polisher’s disc and put an small amount of light cut compound on the pad. Now, take the foam polishing pad on your oscillating polisher and Finish with it.
4) Now take polishing compound on the pad and run it through the affected area until scratch disappears completely.
Removing Deep Scratches: – For mending these marks, you need to do a light paint touch-up on the affected area. Buy touch-up paint as per the make and model of your car. The paint should be exactly in matching with the shed and metallic look of your cars body. Follow the instructions provided in the car paint touch-up manual.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
14 Kasım 2011 Pazartesi
13 Kasım 2011 Pazar
Fixing Small Digs or Dents on Car’s Exterior
Sometimes even a small dent or dig can affect the overall road presence very badly. But only a few people know that they can be mended at home very easily, without taking help of a denting & painting mechanic. Here are few easy steps to fix the small dent that is spoiling your cars road presence.
1)First of all, put on gloves in both hands to keep them safe from coming in contact with any harmful chemical.
2)Take a piece of dry ice of the size of dent and place it directly into the dig or dent for at least five minutes.
3)Remove the dry ice and wait for at least five minutes.
4)After a few minutes, the dig or dent will start popping-up and the affected surface will start coming into its previous normal shape.
5)Repeat the same process till the dent disappears and car surface comes into its original size.
6)Clean the remaining of dry ice particles with the help of a rag. And you will surely feel happy for making your car dent less without splurging too much money on denting exercise.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all, put on gloves in both hands to keep them safe from coming in contact with any harmful chemical.
2)Take a piece of dry ice of the size of dent and place it directly into the dig or dent for at least five minutes.
3)Remove the dry ice and wait for at least five minutes.
4)After a few minutes, the dig or dent will start popping-up and the affected surface will start coming into its previous normal shape.
5)Repeat the same process till the dent disappears and car surface comes into its original size.
6)Clean the remaining of dry ice particles with the help of a rag. And you will surely feel happy for making your car dent less without splurging too much money on denting exercise.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Scratches From a Metallic Car
The scratches on a metallic colored car can prove a complete image spoiler for its road presence. These scratches can affect the multiple layers of the car’s body paint. However, there are certain steps that a car owner can take in order to repair these scratches and bring the cars lost grace back. Below are few easy steps for repairing these kinds of scratches from the body of your car.
1)First of all check the affected area carefully and determine the severity of the damage. Different kind of scratches needs to be repaired in a different manner. You can easily observe the deepness of the scratch just by running your fingernail on it. It can be a surface scratch, or a light scratch or a deep multilayer scratch.
2)Once you have determined the severity of the damage, apply the automotive glaze to the affected area, as instructed at the packaging of the glaze. The Automotive glaze can be found easily at any automotive product supplier. The friction ingredients and oils present in glaze work in tandem to erase the small scratches. However, the method is only useful for removing small scratches.
3)If the glaze doesn’t work, apply the acetone on the affected are and rub it with the help of a soft rag. It falls highly essential in making the scratch less noticeable.
4)You can try to employ the matching color show polish on the affected area along with scratching it the help of a fine send paper.
5)If nothing of the above works, the last option you left with is to get the affected area repainted. Take your car to the nearest authorized body paint shop and get the scratched area repainted.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all check the affected area carefully and determine the severity of the damage. Different kind of scratches needs to be repaired in a different manner. You can easily observe the deepness of the scratch just by running your fingernail on it. It can be a surface scratch, or a light scratch or a deep multilayer scratch.
2)Once you have determined the severity of the damage, apply the automotive glaze to the affected area, as instructed at the packaging of the glaze. The Automotive glaze can be found easily at any automotive product supplier. The friction ingredients and oils present in glaze work in tandem to erase the small scratches. However, the method is only useful for removing small scratches.
3)If the glaze doesn’t work, apply the acetone on the affected are and rub it with the help of a soft rag. It falls highly essential in making the scratch less noticeable.
4)You can try to employ the matching color show polish on the affected area along with scratching it the help of a fine send paper.
5)If nothing of the above works, the last option you left with is to get the affected area repainted. Take your car to the nearest authorized body paint shop and get the scratched area repainted.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Rust from A Car Door
When the car door comes in contact with water, salt and road grim collect, the rust starts surfacing on its exposed metal due to the reaction of oxidation. Rust present on your car’s body not only proves a road-presence spoiler for your car but also poses a danger of growing from a small spot to whole car body. The rust generally starts developing on metal exposed through scratches on car’s body. The immediate removal of rust ensures that it will not spread to other parts of the car. Here are few easy tips for removing rust from a car door.
1)First try to remove the rust with the help of 100-grit sandpaper. Keep sanding the rusted surface till you can see the bare surface.
2)Now use 120-grit sandpaper for removing the paint on the area around the rust.
3)Take 150-grit sandpaper and gently send the affected area until the metal gets smooth.
4)Now isolate the area that you are going to paint by covering all other near by portions of the car’s body by tapping news on it.
5)For initial painting process, apply three coats of car primer on the affected area. Remember, there should be a gap of about 10 minutes in the application each coat of primer. After applying primer, leave the car for drying for at least 24 hours.
6)Now give the area a light coat of automotive touch-up paint. Apply enough coats of the car paint so that the premier can be made completely invisible. Remember, the paint you are using should be exactly in matching with your car’s body paint.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First try to remove the rust with the help of 100-grit sandpaper. Keep sanding the rusted surface till you can see the bare surface.
2)Now use 120-grit sandpaper for removing the paint on the area around the rust.
3)Take 150-grit sandpaper and gently send the affected area until the metal gets smooth.
4)Now isolate the area that you are going to paint by covering all other near by portions of the car’s body by tapping news on it.
5)For initial painting process, apply three coats of car primer on the affected area. Remember, there should be a gap of about 10 minutes in the application each coat of primer. After applying primer, leave the car for drying for at least 24 hours.
6)Now give the area a light coat of automotive touch-up paint. Apply enough coats of the car paint so that the premier can be made completely invisible. Remember, the paint you are using should be exactly in matching with your car’s body paint.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
When To Refill Or Change Car Brake Fluid
When it comes to maintaining a car, most of us do a considerably good job by timely changing oil and air filters, and topping-up the essential fluids like brake fluid and transmission fluid. But have you ever done the same for your brake fluid? Most people don’t. In other words, despite being one of the most important fluids from the safety point of view, the brake fluids are perhaps the most neglected fluid in your car. Below are some basic information regarding the functioning of brake fluid along with reasons of its contamination.
Reason of Increasing Moisture Content: - Every time you open the master cylinder for checking the level of brake fluid, it tends to capture the moisture from the air. The high the moister content in brake fluid, the lesser its efficiency. As per the auto engineering experts, cars only one year old can have brake fluid with moisture contamination of two percent and even higher.
Affects of Increased Moisture Content: - Generally, under extreme brake uses the essential brake components including rotors, pads, drums, and shoes tend to reach the high temperatures of over 400 to 500 degree. The DOT 3 brake fluid will begin to boil when it crosses a temperature of 400 degrees. But if the moisture content in your brake fluid has been increased to up to 3 percent, its boiling temperature reduces by up to 25 percent. The basic reason behind this is that when brake fluid gets exposed to the high temperatures, the moisture content present in fluid starts turning into stream and remains as an incompressible part of fluid. This in turn reduces stopping ability of the braking system.
Harms to the Braking Efficiency: – As mentioned above, the contaminated brake fluid harms the efficiency of the overall braking system. Moreover, the excess of moisture can cause corrosion to the internal metal parts such as calipers, brake lines, wheel cylinders and pressure valves.
Experts Recommend: – According to auto engineering experts, the car brake fluid should be changed after every 40,000 km or 2 years (whichever occur earlier).
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Reason of Increasing Moisture Content: - Every time you open the master cylinder for checking the level of brake fluid, it tends to capture the moisture from the air. The high the moister content in brake fluid, the lesser its efficiency. As per the auto engineering experts, cars only one year old can have brake fluid with moisture contamination of two percent and even higher.
Affects of Increased Moisture Content: - Generally, under extreme brake uses the essential brake components including rotors, pads, drums, and shoes tend to reach the high temperatures of over 400 to 500 degree. The DOT 3 brake fluid will begin to boil when it crosses a temperature of 400 degrees. But if the moisture content in your brake fluid has been increased to up to 3 percent, its boiling temperature reduces by up to 25 percent. The basic reason behind this is that when brake fluid gets exposed to the high temperatures, the moisture content present in fluid starts turning into stream and remains as an incompressible part of fluid. This in turn reduces stopping ability of the braking system.
Harms to the Braking Efficiency: – As mentioned above, the contaminated brake fluid harms the efficiency of the overall braking system. Moreover, the excess of moisture can cause corrosion to the internal metal parts such as calipers, brake lines, wheel cylinders and pressure valves.
Experts Recommend: – According to auto engineering experts, the car brake fluid should be changed after every 40,000 km or 2 years (whichever occur earlier).
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Tips For Protecting Cars During Rains
The rainy season comes with a need of protecting your vehicle from getting damaged from water. Parking or driving your car on waterlogged streets can be highly dangerous for it, thus, a number of precautions are needed to be taken during this season. Below are few preventive tips in order to save your vehicle from getting damaged.
1)Insurance Cover: – The best cover for your vehicle during heavy rains is an insurance cover. Don’t forget to renew or update the insurance policy of you car so that the expense of repairing of any unfortunate damange in the car can be fully/partially reimbursed by the insurance provider. The comprehensive motor policy of a vehicle generally covers damage due to inundation, flood, earthquake etc.
2)Park at a Safe Place: – During the rainy seasons, avoid parking the car in low-lying parking lots or areas like basements. Also avoid parking the car at the areas like under a tree or hording and near a transformer. However, if the vehicle has already been damaged due to inundation or heavy rain, never try to start any electrical installation as it might cause fire in the vehicle.
3)Drive Carefully: – Driving the car roughly during heavy rains can prove very dangerous for both passengers as well as for car. Avoid driving on high speeds on waterlogged roads and try to keep a distance between the ongoing traffic. However, if you have no option left but to drive the car on a waterlogged road, keep the acceleration as moderate as possible.
4)Other Protections: – If you notice that water level out side the car is constantly increasing, avoid being seated inside the car. Turn the AC off if water level outside is considerably high. Make sure that doors and windows and back hatch of your car are fully closed at the time of parking as well as while driving on waterlogged roads.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)Insurance Cover: – The best cover for your vehicle during heavy rains is an insurance cover. Don’t forget to renew or update the insurance policy of you car so that the expense of repairing of any unfortunate damange in the car can be fully/partially reimbursed by the insurance provider. The comprehensive motor policy of a vehicle generally covers damage due to inundation, flood, earthquake etc.
2)Park at a Safe Place: – During the rainy seasons, avoid parking the car in low-lying parking lots or areas like basements. Also avoid parking the car at the areas like under a tree or hording and near a transformer. However, if the vehicle has already been damaged due to inundation or heavy rain, never try to start any electrical installation as it might cause fire in the vehicle.
3)Drive Carefully: – Driving the car roughly during heavy rains can prove very dangerous for both passengers as well as for car. Avoid driving on high speeds on waterlogged roads and try to keep a distance between the ongoing traffic. However, if you have no option left but to drive the car on a waterlogged road, keep the acceleration as moderate as possible.
4)Other Protections: – If you notice that water level out side the car is constantly increasing, avoid being seated inside the car. Turn the AC off if water level outside is considerably high. Make sure that doors and windows and back hatch of your car are fully closed at the time of parking as well as while driving on waterlogged roads.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
How To Maintain Your New Car Properly
When you buy a new car, the best you can do for it is a proper maintenance. A well maintained car last longer and performs better. Moreover, the cost of maintenance can be decreased considerably by following a few car preventive car maintenance tips. In other words you need to understand your car better and should give priority to its time to time maintenance. Let us understand what the preventive car maintenance basically is.
Preventive Maintenance: - Preventive maintenance is the kind of maintenance that prevents the essential parts of your car from wearing-out early. This is because a machine needs proper protection and that too in time. Otherwise, even a small fault can grow-up the irreparable condition and you might end-up paying more than double on getting replaced this permanently faulty part.
Tips: – There are a number of new car preventive maintenance tips that one should follow in order to keep one’s pockets from heavy workshop maintenance bills. Here are few of these essential tips.
1) Regular Oil Change: – Oil is no doubt one of the most important aspects of keeping the performance of a car engine up to the mark. The oil keeps the engine components lubricated and prevents the friction among the components. But after a long use the engine oil tends to lose its lubrication power due to the heat and mixing of dirt and metal components. Thus, oil should be changed strictly as per schedule.
2) Maintain Fluid Level: – There are a number of fluids that one should take care of in order to keep the performance their respective components up to the mark. These fluids include engine coolant fluid, transmission fluid, brake fluid and battery fluid. All of these fluids should be checked and maintained on a fortnight basis.
3) Regular Servicing: – The car should be taken to the company’s registered service center strictly as per schedule so that each and every part of the car checked/maintained in the supervision of skilled company engineers.
4) Tyre Pressure: – This is perhaps the most neglected aspect of car maintenance. Where the high tyre pressure can cause an early wear to the wheels and suspension system of the car, the low inflated tyres enhances the fuel economy by as much as 10 percent.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Preventive Maintenance: - Preventive maintenance is the kind of maintenance that prevents the essential parts of your car from wearing-out early. This is because a machine needs proper protection and that too in time. Otherwise, even a small fault can grow-up the irreparable condition and you might end-up paying more than double on getting replaced this permanently faulty part.
Tips: – There are a number of new car preventive maintenance tips that one should follow in order to keep one’s pockets from heavy workshop maintenance bills. Here are few of these essential tips.
1) Regular Oil Change: – Oil is no doubt one of the most important aspects of keeping the performance of a car engine up to the mark. The oil keeps the engine components lubricated and prevents the friction among the components. But after a long use the engine oil tends to lose its lubrication power due to the heat and mixing of dirt and metal components. Thus, oil should be changed strictly as per schedule.
2) Maintain Fluid Level: – There are a number of fluids that one should take care of in order to keep the performance their respective components up to the mark. These fluids include engine coolant fluid, transmission fluid, brake fluid and battery fluid. All of these fluids should be checked and maintained on a fortnight basis.
3) Regular Servicing: – The car should be taken to the company’s registered service center strictly as per schedule so that each and every part of the car checked/maintained in the supervision of skilled company engineers.
4) Tyre Pressure: – This is perhaps the most neglected aspect of car maintenance. Where the high tyre pressure can cause an early wear to the wheels and suspension system of the car, the low inflated tyres enhances the fuel economy by as much as 10 percent.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Removing Smoke Smell From Car’s Interior
Sometimes, the smell of cigarette smoke just refuse to go out of your cars interior no matter how many tricks you apply. The basic reason behind this permanent smoke smell is the presence of smoke particle on or under your cars fabric. Here are few tips to get rid of smoke smell present in your car’s interior.
1)First of all test the multi-surface fabric cleaner for discoloration on any hidden spot of your car’s fabric. If everything goes well and there is no discoloration, than your fabric cleaner is up to mark for this task.
2)Now, gently spray the cleaner on fabric of your car with reaching every possible spot. Avoid over spraying the cleaner.
3)Now, take a small square size sponge and wet it in warm water. Remember, the water should not be too hot, other wise it can burn your hands and can also cause discoloring of fabric.
4)Rinse the seats with the help of this wet-sponge. Try to reach every possible corner of the seat fabric. While Rinsing, keep dipping the sponge in warm water again and again in order to keep it clean from dirt and dust. Wipe out every part of the floor carpet.
5)Now, allow your car’s interior to dry. If you have garage to keep the car than leave the car windows down overnight.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
1)First of all test the multi-surface fabric cleaner for discoloration on any hidden spot of your car’s fabric. If everything goes well and there is no discoloration, than your fabric cleaner is up to mark for this task.
2)Now, gently spray the cleaner on fabric of your car with reaching every possible spot. Avoid over spraying the cleaner.
3)Now, take a small square size sponge and wet it in warm water. Remember, the water should not be too hot, other wise it can burn your hands and can also cause discoloring of fabric.
4)Rinse the seats with the help of this wet-sponge. Try to reach every possible corner of the seat fabric. While Rinsing, keep dipping the sponge in warm water again and again in order to keep it clean from dirt and dust. Wipe out every part of the floor carpet.
5)Now, allow your car’s interior to dry. If you have garage to keep the car than leave the car windows down overnight.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Warming Up a Car Battery Without a Jump Start
Many a times we ignore the importance of battery in our vehicle and thereafter face trouble because of the same. Car’s battery is quite a significant component of your vehicle and without it your car won’t start. Even the temperature affects the battery’s performance, and when the battery is at 0 degrees F, only half of the normal cranking power will be produced whereas the drop in temperature of 20 degrees F, it will raise out less power capacity. So here are some steps to warm up your battery so that you can easily start your vehicle.
Some important things you need are:
Open the hood and just check where the battery is located and the same depends on the moel of the car you are using. The battery is usually located in the four corners of the engine, so make sure you check the corners first. In case you are not able to locate the battery, you must check the details in the owner’s manual.
To easily loose the bolt you must use an adjustable wrench while holding the clamp on the negative battery terminal. You can comfortable recognize the negative clamp as it is of black color. Not what you need to do is just remove the clamp from the terminal.
Same as described above, remove the positive battery clamp from the positive battery terminal. After taking out the battery clamp gently lift the battery out of the vehicle.
You can gradually warm the battery by keeping it indoors. When the battery comes to normal temperature and is not so cold to touch, just reinstall it in your car start your vehicle.
Freezer Bag Method
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Some important things you need are:
- Adjustable wrench
- Water
- Freezer bags
- Blanket
Open the hood and just check where the battery is located and the same depends on the moel of the car you are using. The battery is usually located in the four corners of the engine, so make sure you check the corners first. In case you are not able to locate the battery, you must check the details in the owner’s manual.
To easily loose the bolt you must use an adjustable wrench while holding the clamp on the negative battery terminal. You can comfortable recognize the negative clamp as it is of black color. Not what you need to do is just remove the clamp from the terminal.
Same as described above, remove the positive battery clamp from the positive battery terminal. After taking out the battery clamp gently lift the battery out of the vehicle.
You can gradually warm the battery by keeping it indoors. When the battery comes to normal temperature and is not so cold to touch, just reinstall it in your car start your vehicle.
Freezer Bag Method
- In freezer bag method, use the hot tap water to fill up six freezer bags.
- Now place the freezer bags on top and around the cold battery placed in your car.
- Cover it with a thick blanket and wait for about half-an-hour.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Simplistic Way to Jump Start a Car with Manual Transmission on a Hill
Are you stuck in the middle of your journey to home and do not have the jumper cables to start your vehicle? Don’t get disturbed as it is quite easy to jump start your car with a manual transmission. Without jumper cables all you require to start your vehicle is a stretch of downhill road. This trick is really helpful as you are using the weight of the car to force an engine to turn over. This automatically results into a quick start up of a car without the use of any battery.
Important things you’ll require:
First is a qualified driver who can drive a manual transmission
And second is a stretch of downhill road, preferably paved
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things you’ll require:
First is a qualified driver who can drive a manual transmission
And second is a stretch of downhill road, preferably paved
- First thing you’ll need to keep in mind is to see a stretch of paved road that is downhill and free from hindrances. You are required to get the car up to approximate 10-15 mph and atleast 100 feet of downhill road to smoothly jump start the car. It will be easier if you can go quicker and faster.
- Second thing you need to do is insert the car key to the on position, place the transmission in first gear and push in the clutch. Make sure to firmly hold the clutch to the floor until you’re ready to jump start the car.
- Now take off the car down the hill so that it gains a speed of at least 10 mph or more. Better if you can ask for help and get someone to push the car so that it gains speed.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
A Great Trick to Flush Off Windshield Washer Fluid Lines
This is quite irritating when the windshield washing fluid barely makes it to the bottom of the windshield while driving during the inclement weather. The trouble sets when the windshield fluid travels through the tubes and then to nozzles mounted on the hood of your car. And the result is that the plugs in the tubes cause low pressure. All this leads to more mess as windshield wipers not able to clean the windshield perfectly and the complete tube is clogged with dirt and debris. Therefore it’s important to clean and flush off the windshield washer’s fluid lines from time to time and include the process in the routine maintenance of your car.
Important things you’ll require:
1.Syringe
2.Compressed air
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things you’ll require:
1.Syringe
2.Compressed air
- Firstly you have to detach the fluid lines from the washer fluid reservoir and then at the back of the hood where the tubing splits into two lines to the windshield.
- Now just fill warm water in a bulb or plunger-type syringe.
- Next you need to insert the syringe into the single tubing end. After infixing the syringe, slowly flush off the dirt and debris from the tubing and clear the clogged tube.
- You can also use compressed air to clear dust from the tubing.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
An Easy Way to Check out Radiator and Coolant Hoses in a Car
Many a times we neglect to examine our car’s radiator and coolant hoses but ignoring the same can cause greater mess. Ignored and worn out hoses usually prevent your engine to run smoothly without any flaw as the engine is supplied with vital liquids. Therefore checking out your car’s radiator and coolant hoses is a standard practice in any vehicle tune-up.
Important things you’ll require:
2.Check out the radiator and coolant hoses that are leaking, cracked or rusted.
3.Do not miss to check for signs of dry rotting or splits in the hoses; if they are rotted then it clearly indicates that the rubber is deteriorated.
4.Now take hold of the radiator hose near the clamp and make sure the hose should be tight and must not rotate.
5.Do check and verify that there is sufficient amount of tension in the belts.
6.Apply enough pressure to the belt and keep an eye on it so that it deflects approximately one and a half inch.
7.Squeeze and check the compressibility of radiator hoses and make sure they are firm to hold. When you squeeze the radiator hoses, they should spring back. But if the hose remains flat then it might be deteriorating from inside.
8.Before you change the radiator or coolant hoses ensure that they are drained out completely. After you discard the liquid replace the hoses and refill the radiator with new coolant.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things you’ll require:
- Flashlight
- Screwdriver
- Latex gloves
- Coolant
2.Check out the radiator and coolant hoses that are leaking, cracked or rusted.
3.Do not miss to check for signs of dry rotting or splits in the hoses; if they are rotted then it clearly indicates that the rubber is deteriorated.
4.Now take hold of the radiator hose near the clamp and make sure the hose should be tight and must not rotate.
5.Do check and verify that there is sufficient amount of tension in the belts.
6.Apply enough pressure to the belt and keep an eye on it so that it deflects approximately one and a half inch.
7.Squeeze and check the compressibility of radiator hoses and make sure they are firm to hold. When you squeeze the radiator hoses, they should spring back. But if the hose remains flat then it might be deteriorating from inside.
8.Before you change the radiator or coolant hoses ensure that they are drained out completely. After you discard the liquid replace the hoses and refill the radiator with new coolant.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Quick Simple Way to Jump Start Your 12 Volt Car Battery
Are you stuck at some point and need to jump start your 12 volt car battery. In order to start your car battery, you will require a set of jumper cables and to access the same a second vehicle that has a full-charged battery. This article will guide you to quickly jump start your own vehicle by following few simple steps.
Important things you’ll require:
2.Now bring the second vehicle with full battery next to the vehicle with the dead battery. Position both of them equally to attach the jumper cables, open the second vehicle’s hood and make sure you’ve turned off the ignition. Also remove any of the shields that are covering the battery and put on your gloves and safety glasses before jumping the battery.
3.Next you have to attach the positive clamp of your jumper cables to the positive terminal (+) of the battery. For your information the positive jumper cable clamp is generally red or yellow in color, while the negative is always black.
4.Now you need to attach the other positive cable clamp to the positive battery terminal on the secondary vehicle. Also connect the negative clamp to the negative (-) terminal. And now you are left with just one negative clamp.
5.Thereafter, the remaining negative clamp needs to be attached to the engine block on the vehicle with the drained battery. The negative clamp can be attached to any bolt or bracket, but make sure not to join it with any fuel line, carburetor or moving part of the engine like the fan or pulley.
6.Start the ignition on your secondary vehicle and permit it to operate for few minutes, this will in turn help the dead battery to charge. After few minutes try and start the vehicle with the drained battery.
7.Now unhook the cables and remove the negative clamp first which is attached to the metal bolt or bracket. Then remove the negative clamp on the secondary vehicle, followed by the positive clamp on the same. After all this finally you have to remove the positive clamp from the vehicle with the previously dead battery. Do not allow the clamps to touch and also keep them away from the engine’s moving parts.
8.You are all set to drive the vehicle and the alternator will charge the battery after you drive for thirty minutes
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Important things you’ll require:
- Jumper cables
- Safety glasses
- Gloves
- Other vehicle with fully-charged battery
2.Now bring the second vehicle with full battery next to the vehicle with the dead battery. Position both of them equally to attach the jumper cables, open the second vehicle’s hood and make sure you’ve turned off the ignition. Also remove any of the shields that are covering the battery and put on your gloves and safety glasses before jumping the battery.
3.Next you have to attach the positive clamp of your jumper cables to the positive terminal (+) of the battery. For your information the positive jumper cable clamp is generally red or yellow in color, while the negative is always black.
4.Now you need to attach the other positive cable clamp to the positive battery terminal on the secondary vehicle. Also connect the negative clamp to the negative (-) terminal. And now you are left with just one negative clamp.
5.Thereafter, the remaining negative clamp needs to be attached to the engine block on the vehicle with the drained battery. The negative clamp can be attached to any bolt or bracket, but make sure not to join it with any fuel line, carburetor or moving part of the engine like the fan or pulley.
6.Start the ignition on your secondary vehicle and permit it to operate for few minutes, this will in turn help the dead battery to charge. After few minutes try and start the vehicle with the drained battery.
7.Now unhook the cables and remove the negative clamp first which is attached to the metal bolt or bracket. Then remove the negative clamp on the secondary vehicle, followed by the positive clamp on the same. After all this finally you have to remove the positive clamp from the vehicle with the previously dead battery. Do not allow the clamps to touch and also keep them away from the engine’s moving parts.
8.You are all set to drive the vehicle and the alternator will charge the battery after you drive for thirty minutes
source:http://www.carzy.co.in/blog/car-maintenance-tips/
A Great Way to Charge Car Battery by Driving
Are you stuck in the middle of the road? With the help of a manual transmission you can conveniently start the car that has a discharged battery. All you need is to push start the car and charge the battery while driving. The battery power of a car can be restored by driving and therefore a jump start from another vehicle is not required. Though driving can easily add battery power to a vehicle with an automatic transmission, still your car will need a jump in order to start the charged battery.
Easy instructions to follow:
Firstly, you need to do is to turn off everything that requires battery power. Things that involve power consumption are radios, air conditioning units and interior lights. You must always charge the battery during the day time and also in fine weather, so that you will not require headlights and windshield wipers too.
Secondly, try and push start your car with the dead battery, thereafter press the clutch and go into first gear. Get the help of another person to push start the car by slowly releasing the brakes. Now release the clutch rendering a little gas to get the vehicle running.
Thirdly, find out a low crowded area to drive the car at a consistent speed. For this type of driving and to charge the depleted battery, highway is the best place to be. City driving is not recommended as will not furnish an even place to drive and recharge the battery.
Fourthly, you need to continuously drive the car for atleast 30 minutes in order to charge the battery. Make sure you keep all the power sources off during this period of time. Half an hour driving is absolutely necessary to render the battery a good enough charge; else you can drive for long as well.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Easy instructions to follow:
Firstly, you need to do is to turn off everything that requires battery power. Things that involve power consumption are radios, air conditioning units and interior lights. You must always charge the battery during the day time and also in fine weather, so that you will not require headlights and windshield wipers too.
Secondly, try and push start your car with the dead battery, thereafter press the clutch and go into first gear. Get the help of another person to push start the car by slowly releasing the brakes. Now release the clutch rendering a little gas to get the vehicle running.
Thirdly, find out a low crowded area to drive the car at a consistent speed. For this type of driving and to charge the depleted battery, highway is the best place to be. City driving is not recommended as will not furnish an even place to drive and recharge the battery.
Fourthly, you need to continuously drive the car for atleast 30 minutes in order to charge the battery. Make sure you keep all the power sources off during this period of time. Half an hour driving is absolutely necessary to render the battery a good enough charge; else you can drive for long as well.
source:http://www.carzy.co.in/blog/car-maintenance-tips/
Kaydol:
Kayıtlar (Atom)